Parts Checklist - AT&T CL84115 Complete User's Manual

Dect 6.0 corded/cordless telephone/answering system with caller id/call waiting
Hide thumbs Also See for CL84115:
Table of Contents

Advertisement

Parts checklist

Your telephone package contains the following items. Save your sales receipt
and original packaging in the event warranty service is necessary.
Abridged user's manual
CL84115/CL84215/CL84265/
CL84365
DECT 6.0 corded/cordless
telephone/answering system
with caller ID/call waiting
Abridged
user's manual
Telephone base
Battery for cordless handset
(1 for CL84115)
(2 for CL84215/CL84265)
(3 for CL84365)
Quick start guide
CL84115/CL84215/CL84265/CL84365
This quick start guide provides you with basic instructions only.
For more complete instructions, refer to your Abridged user's
manual provided in the package, or see the online Complete
user's manual at www.telephones.att.com/manuals.
Telephone base installation
Plug one end of the
telephone line cord
into a telephone jack
or a DSL filter.
If you have DSL high-speed
Internet service, a DSL filter
(not included) is required.
Telephone line cord
Raise the antenna.
Telephone line cord
Plug the other end of the
telephone line cord into the
telephone jack on the back
of the telephone base.
Charger installation
Plug the power adapter into
a power outlet not controlled
by a wall switch.
One end of the coiled
Plug the other end
handset cord has already
of the coiled handset
been plugged into the
cord into the jack
handset. Make sure it is
on the back of the
plugged in firmly.
telephone base.
Caution: Use only the power adapter provided with this product. To obtain a replacement, visit
www.telephones.att.com
1 (800) 222-3111
our website at
or call
1 (866) 288-4268
Canada, dial
.
Quick start guide
Corded handset
with coiled handset
cord attached
Battery compartment cover
(1 for CL84115)
(2 for CL84215/CL84265)
(3 for CL84365)
Plug the large end of the
telephone base power
adapter into a power
outlet not controlled by a
wall switch.
Route the cords through
the channels.
Plug the small end of the
telephone base power
adapter into the power
adapter jack on the back
of the telephone base.
Route the handset
cord through its
channel.
. In
Cordless handset
(1 for CL84115)
(2 for CL84215/CL84265)
(3 for CL84365)
Power adapter for
telephone base
Charger for cordless
handset with power
adapter installed
(1 for CL84115)
(2 for CL84215/CL84265)
(3 for CL84365)
Telephone line cord

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cl84215Cl84265Cl84365

Table of Contents