Blind Transfer - AT&T CL84115 Complete User's Manual

Telephone operation
Options while on calls

Blind transfer

While on an outside call, you can transfer the call to a specific device or any
device without notifying them.
To transfer an outside call from a handset:
1. During the call, press MENU/
/�ELECT to choose Transfer.
2. Press
MENU
• If you have one handset and no other registered devices,
the outside call is put on hold and your handset shows
Transferring call.... The telephone base rings and shows
Transfer from HAND�ET X.
• If you have other registered device(s) or more than one
handset, your screen shows TRAN�FER TO:. Use the
dialing keys to e e nter a specific device number (0 for the
telephone base, 1-9 for handsets 1-9, TONE followed
by 0-2 for handsets 10-12, or TONE followed by #
for all devices), or press
desired device and press
call is put on hold and your handset screen shows
Transferring call... or Transferring call to all.... The
other device rings and shows Transfer from HAND�ET X (HAND�ET
represents the handset name, X represents the handset number).
3. To answer the call on the destination handset, press
or /��EA�ER ��EA�ER. To answer the call on the telephone base, lift the
corded handset or press
Call transferred and goes to idle mode.
�ELECT
press q
CID
MENU
To answer the call on the telephone base, lift the
/��EA�ER ��EA�ER. The initiating handset shows
.
or p
to scroll to the
DIR
/�ELECT. The outside
, press �HONE/
42
Phone 0:00:12
6:30 8/06
AM
>Transfer
Intercom
TRANSFER TO:
>HANDSET 2
FLA�H
, lift the