Caller Id Log; How The Caller Id Log Works; Missed (New) Call Indicator - AT&T CL84115 Complete User's Manual

Caller ID

Caller ID log

How the caller ID log works

The telephone stores caller ID information about the last 50 incoming calls
in the telephone base. Entries are stored in reverse chronological order. The
phone deletes the oldest entry when the log is full to make room for new
calls. This information is common to the telephone base and all handsets,
so changes made using any handset or the telephone base are reflected
in all other devices. If you answer a call before the information appears on
the screen, it does not show in the caller ID log.
NOTE: Each entry may have up to 24 digits for the phone number and 15 characters for
the name.

Missed (new) call indicator

When a handset or the telephone base is in idle mode and
has new or missed calls, its screen shows XX Missed calls.
All new and missed entries are counted as missed calls. Each
time you review a new caller ID log entry (indicated by NEW
on the screen), the missed calls message goes away. When
there is a new unanswered call, the missed calls message
displays again. The number of missed calls includes all new
and missed entries that have not been reviewed.
If you do not want to review the missed calls one by one,
but still want to keep them in the caller ID log, you
can press and hold
four seconds when the handset is idle, or press and hold
CANCEL on the telephone base for four seconds when
the telephone base is idle. You will hear a confirmation
tone. All the entries in the caller ID log become old
(reviewed already), and the missed calls message
goes away.
/CANCEL on the handset for
OFF
65
HANDSET
6 Missed calls
AM 10/15
10:01
Robert Brown
888-883-2445
NEW
AM 10/15
09:30
BASE
6 Missed calls
MSG #
1
10:01
10/15
PM
Robert Brown
888-883-2445
MSG #
1
10:01 10/15
PM
1
p
q
NEW