Directory
Create directory entries
Create a new directory entry
1. Press MENU/
2. Press q
or p
CID
/SELECT.
MENU
3. Press q
or p
CID
4. Press
/SELECT.
MENU
5. Use the dialing keys to enter a telephone number (up
to 30 digits) when prompted.
Press q
•
CID
or right.
•
Press
MUTE
•
Press and hold
•
Press and hold
dialing pause (a p appears).
-OR-
Copy a number from the redial list by pressing
REDIAL/
PAUSE,
to locate the number. Press
6. Press
/SELECT to move on to the name.
MENU
The display shows Number already saved if the number
is already in the directory. You cannot save the same number twice.
7. Use the dialing keys to enter a name (up to 15 characters) when prompted.
Each time you press a key, the character on that key appears. Additional key
presses produce other characters on that key. See the
chart on the next page.
Press q
•
CID
or right.
•
Press 0 to add a space.
•
Press
MUTE
•
Press and hold
8. Press
/SELECT to store your new directory entry. There is a
MENU
confirmation tone and the screen shows Saved. To change the entry later,
see page 35.
NOTE: The first letter of every word is a capital letter. The remaining letters in a word start as
lower case letters, as shown in the chart on the next page.
in idle mode to enter the main menu.
SELECT
to scroll to >Directory, then press
DIR
to highlight >Add contact.
DIR
or p
to move the cursor to the left
DIR
/DELETE to erase a digit.
/DELETE to erase all digits.
MUTE
/PAUSE to enter a three-second
REDIAL
then q
or p
CID
MENU
or p
to move the cursor to the left
DIR
/DELETE to erase a character.
/DELETE to erase all characters.
MUTE
, or pressing REDIAL/
DIR
/SELECT to copy the number.
32
Answering sys
>Directory
Review
>Add contact
ENTER NUMBER
888-883-2445_
repeatedly
PAUSE
ENTER NAME
Charlie Johnson_