Options During Playback - AT&T CL84115 Complete User's Manual

Answering system
Message playback

Options during playback

When a message is playing, you can adjust the playback volume, skip, repeat,
pause, stop or delete the message.
When messages are playing on the telephone base:
Press VOL q or VOL p to adjust the message playback volume.
•
• Press /��I� to skip to the next message.
/RE�EAT to repeat the message. Press twice to hear the previous
• Press
message.
Press X/DELETE to delete the message.
•
• Press /
�LAY
/��EA�ER ��EA�ER to stop playback. The screen shows Call back?, then press
• Press
/�ELECT, or
MENU
is available. If the dialing format used is not correct, then use the following
option to choose the correct dialing format before calling back the caller.
• Press /�ELECT to pause playback and show the caller ID information,
MENU
if available. From here, you can press CANCEL to resume playback.
You can also press # (pound key) repeatedly to show the desired dialing
option (page 68), then press
the caller. If you do not call back within 10 seconds, message playback
resumes automatically.
When messages are playing on the handset:
• Press q /VOLUME or p
CID
Press EQ
• to adjust the message playback audio quality.
• Press 6 to skip to the next message.
Press 4 to repeat the message. Press twice to hear the previous message.
•
• Press /DELETE to delete the message.
MUTE
• Press 5 or
OFF
• Press /��EA�ER ��EA�ER to switch between speakerphone mode and handset mode.
• Press �HONE/
then press
MENU
caller if the caller's number is available. If the dialing format used is not
correct, then use the following option to choose the correct dialing format
before calling back the caller.
/�ELECT to pause playback and show the caller ID information,
• Press
MENU
if available. From here, you can press
You can press # (pound key) repeatedly to show the desired dialing
option (page 68), then press �HONE/
the caller. If you do not call back within 10 seconds, message playback
resumes automatically.
NOTE: The equalizer stays on the same settings until you change it by pressing EQ .
/�TO� to stop the playback.
/��EA�ER ��EA�ER to call back the caller if the caller's number
/ VOLUME to adjust the message playback volume.
DIR
/CANCEL to stop the playback.
to stop playback. The screen shows Call back?,
FLA�H
/�ELECT, �HONE/
/��EA�ER ��EA�ER or
MENU
or
FLA�H,
/CANCEL to resume playback.
OFF
or
FLA�H
90
/�ELECT to call back
/��EA�ER ��EA�ER to call back the
/��EA�ER ��EA�ER to call back