Configuring The Network Settings Of The Receiver - Sony STR-DN840 Operating Instructions Manual

Multi channel av receiver
Hide thumbs Also See for STR-DN840:
Table of Contents

Advertisement

To cancel Auto Calibration
The Auto Calibration function will be
canceled when you perform the following
during the measurement process:
– Press ?/1.
– Press the input buttons on the remote
control or turn the INPUT SELECTOR
on the receiver.
– Press
.
– Press SPEAKERS on the receiver.
– Change the volume level.
– Connect the headphones.
To set up the receiver
manually
See "Adjusting Settings" (page 80).
Configuring the network
settings of the receiver
The network settings for the receiver must
be set correctly to use the Home Network,
SEN, AirPlay, and PARTY STREAMING
functions.
Using a wired LAN
connection
DISPLAY
1
Press HOME.
The home menu is displayed on the TV
screen.
2
Press V/v repeatedly to select
"Settings", then press
3
Press V/v repeatedly to select
"Network Settings", then press
4
Press V/v repeatedly to select
"Internet Settings", then press
5
Press V/v repeatedly to select
"Wired Setup", then press
If "Change Settings?" appears on the
TV screen, select "OK", then press
6
Press V/v repeatedly to select
"Auto", then press
IP settings information appears on the
TV screen.
When using a fixed IP address
Select "Custom", then press
IP Address Setting appears on the TV
screen.
Press
for "IP Address". Press b to key in the
value for the next position. Press
exit cursor.
Next, enter the value for "Subnet
Mask" and "Default Gateway". Press
b for DNS Settings page. Then enter
the value for "Primary DNS" and
"Secondary DNS".
7
Press
"Connecting to the Internet" appears
on the TV screen. "Network setup is
completed" appears after the network
settings are completed. To return to the
V/v/B/b,
Network Settings menu, press
(Depending on the network
environment, the network settings may
HOME
take some time.)
8
Perform the server settings.
To listen to audio content stored on the
server, you need to set up your server
(page 55).
Tip
.
When checking the network settings, see
"Information" (page 90).
.
.
. Press V/v to select the value
b
.
.
.
.
. The
to
.
35
GB

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents