Wireless Lan Signal Strength - Sony STR-DN840 Operating Instructions Manual

N Dolby Pro Logic indicator
Lights up the respective indicator
when the receiver performs Dolby Pro
Logic processing. This matrix
surround decoding technology can
enhance input signals.
PL
Dolby Pro Logic
PL II Dolby Pro Logic II
PL IIx
Dolby Pro Logic IIx
PL IIz Dolby Pro Logic IIz
Note
These indicators may not light up depending
on the speaker pattern setting.
O A.P.M.
Lights up when the A.P.M. (Automatic
Phase Matching) function is activated.
You can only set the A.P.M. function
in the DCAC (Digital Cinema Auto
Calibration) function (page 32).
P UPDATE
Lights up when a new software is
available (page 70).
Q Wireless LAN signal strength
indicator
Lights up to show the strength of the
wireless LAN signal (page 37, 38).
No signal.
The signal strength is weak.
The signal strength is
moderate.
The signal strength is strong.
R Wired LAN indicator
Lights up when LAN cable is
connected.
S USB
Lights up when iPod/iPhone or USB
device is detected.
* When playing a Dolby Digital or DTS format
disc, make sure that you have completed the
digital connections and that INPUT MODE is
not set to "Analog" (page 77) or "Analog
Direct" is not selected.
11
GB