Sony STR-DN850 Service Manual

Sony STR-DN850 Service Manual

Multi channel av receiver
Hide thumbs Also See for STR-DN850:
Table of Contents

Advertisement

Quick Links

SERVICE MANUAL
Ver. 1.2 2015.03
This receiver incorporates Dolby* Digital and Pro
Logic Surround and the DTS** Digital Surround
System.
* Manufactured under license from Dolby Labo-
ratories. Dolby, Pro Logic, Surround EX, and
the double-D symbol are trademarks of Dolby
Laboratories.
** For DTS patents, see http://patents.dts.
com. Manufactured under license from DTS
Licensing Limited. DTS, DTS-HD, the
Symbol, & DTS and the Symbol together are
registered trademarks, and DTS-HD Master
Audio is a trademark of DTS, Inc. © DTS, Inc.
All Rights Reserved.
This receiver incorporates High-Defi nition Multi-
media Interface (HDMI™) technology. The terms
HDMI and HDMI High-Defi nition Multimedia
Interface, and the HDMI Logo are trademarks or
registered trademarks of HDMI Licensing LLC in
the United States and other countries.
AirPlay, iPad, iPhone, iPod, iPod classic, iPod
nano, and iPod touch are trademarks of Apple
Inc., registered in the U.S. and other countries.
App Store is a service mark of Apple Inc.
All other trademarks and registered trademarks
are of their respective holders. In this manual, ™
and ® marks are not specifi ed.
"Made for iPod," "Made for iPhone," and "Made
for iPad" mean that an electronic accessory
has been designed to connect specifi cally to
iPod, iPhone, or iPad, respectively, and has
been certifi ed by the developer to meet Apple
performance standards.
Apple is not responsible for the operation of
this device or its compliance with safety and
regulatory standards. Please note that the use of
this accessory with iPod, iPhone, or iPad, may
affect wireless performance.
DLNA™,
the
DLNA
Logo
and
DLNA
CERTIFIED™ are trademarks, service marks, or
certifi cation marks of the Digital Living Network
Alliance.
"Sony Entertainment Network" logo and "Sony
Entertainment Network" are trademarks of Sony
Corporation.
Windows and the Windows logo are either
registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other
countries.
This product is protected by certain intellectual
property rights of Microsoft Corporation. Use
or distribution of such technology outside of
this product is prohibited without a license from
Microsoft or an authorized Microsoft subsidiary.
MPEG Layer-3 audio coding technology and
patents licensed from Fraunhofer IIS and
Thomson.
"x.v.Color
(x.v.Colour)"
and
"x.v.Color
(x.v.Colour)" logo are trademarks of Sony
Corporation.
"BRAVIA" is a trademark of Sony Corporation.
"PlayStation" is a registered trademark of Sony
Computer Entertainment Inc.
9-890-646-03
Sony Corporation
2015C80-1
©
2015.03
Published by Sony EMCS (Malaysia) PG Tec
"WALKMAN" and "WALKMAN" logo are
registered trademarks of Sony Corporation.
MICROVAULT is a trademark of Sony Corpora-
tion.
VAIO and VAIO Media are registered trademarks
of Sony Corporation.
The Wi-Fi CERTIFIED Logo is a certifi cation
mark of Wi-Fi Alliance.
MHL, Mobile High-Defi nition Link and the MHL
Logo are trademarks or registered trademarks of
MHL Licensing, LLC.
The Bluetooth
®
word mark and logos are
registered
trademarks
owned
by
Blue-
tooth SIG, Inc. and any use of such marks
by
Sony
Corporation
is
under
license.
Other trademarks and trade names are those of
their respective owners.
© 2013 CSR plc and its group companies. The
aptX® mark and the aptX logo are trade marks of
CSR plc or one of its group companies and may
be registered in one or more jurisdictions.
The N Mark is a trademark or registered trade-
mark of NFC Forum, Inc. in the United States and
in other countries.
Android™ is a trademark of Google Inc.
Google Play™ is a trademark of Google Inc.
"Spotify" and "Spotify" logos are trademarks of
the Spotify Group.
For Software License Information, visit the Help
Guide.
Software License Information
WPA Supplicant
Copyright (c) 2003-2013, Jouni Malinen
<j@w1.fi > and contributors
All Rights Reserved.
This program is licensed under the BSD license
(the one withadvertisement clause removed).
If you are submitting changes to the project,
please see CONTRIBUTIONS fi le for more
instructions.
License
This software may be distributed, used, and
modifi ed under the terms of BSD license:
Redistribution and use in source and binary
forms, with or without modifi cation, are permitted
provided that the following conditions are met:
1. Redistributions of source code must retain the
above copyright notice, this list of conditions
and the following disclaimer.
2. Redistributions in binary form must reproduce
the above copyright notice, this list of condi-
tions and the following disclaimer in the docu-
mentation and/or other materials provided with
the distribution.
3. Neither the name(s) of the above-listed copy-
right holder(s) nor the names of its contributors
may be used to endorse or promote products
derived from this software without specifi c
prior written permission.
STR-DN850
THIS SOFTWARE IS PROVIDED BY THE
COPYRIGHT HOLDERS AND CONTRIBU-
TORS "AS IS" AND ANY EXPRESS OR IM-
PLIED WARRANTIES, INCLUDING, BUT
NOT LIMITED TO, THE IMPLIED WARRAN-
TIES OF MERCHANTABILITY AND FIT-
NESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE
COPYRIGHT OWNER OR CONTRIBUTORS
BE LIABLE FOR ANY DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUD-
ING, BUT NOT LIMITED TO, PROCURE-
MENT OF SUBSTITUTE GOODS OR SER-
VICES; LOSS OF USE, DATA, OR PROFITS;
OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIA-
BILITY, WHETHER IN CONTRACT, STRICT
LIABILITY, OR TORT (INCLUDING NEGLI-
GENCE OR OTHERWISE) ARISING IN ANY
WAY OUT OF THE USE OF THIS SOFTWARE,
EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.
libFLAC
Copyright (C) 2000, 2001, 2002, 2003, 2004,
2005, 2006, 2007 Josh Coalson
Redistribution and use in source and binary
forms, with or without modifi cation, are permit-
ted provided that the following conditions are
met:
• Redistributions of source code must retain the
above copyright notice, this list of conditions
and the following disclaimer.
• Redistributions in binary form must reproduce
the above copyright notice, this list of condi-
tions and the following disclaimer in the docu-
mentation and/or other materials provided with
the distribution.
• Neither the name of the Xiph.org Foundation
nor the names of its contributors may be used
to endorse or promote products derived from
this software without specifi c prior written
permission.
THIS
SOFTWARE
IS
PROVIDED
THE
COPYRIGHT
HOLDERS
AND
CONTRIBUTORS
"AS
IS''
AND
ANY
EXPRESS
OR
IMPLIED
WARRANTIES,
INCLUDING,
BUT
NOT
LIMITED
TO,
THE
IMPLIED
WARRANTIES
MERCHANTABILITY
AND
FITNESS
FOR
A
PARTICULAR
PURPOSE
ARE
DISCLAIMED. IN NO EVENT SHALL THE
FOUNDATION OR CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING,
BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS
OF USE, DATA, OR PROFITS; OR BUSINESS
MULTI CHANNEL AV RECEIVER
US Model
Canadian Model
AEP Model
UK Model
Australian Model
Taiwan Model
INTERRUPTION) HOWEVER CAUSED AND
ON ANY THEORY OF LIABILITY, WHETHER
IN CONTRACT, STRICT LIABILITY, OR
TORT
(INCLUDING
NEGLIGENCE
OTHERWISE) ARISING IN ANY WAY OUT
OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE.
ALAC
Copyright (c) 2002-2008 Apple Inc. All rights
reserved.
Apache License
Version 2.0, January 2004
http://www.apache.org/licenses/
TERMS AND CONDITIONS FOR USE,
REPRODUCTION, AND DISTRIBUTION
1. Defi nitions.
"License" shall mean the terms and conditions
for use, reproduction, and distribution as
defi ned by Sections 1 through 9 of this
document.
"Licensor" shall mean the copyright owner or
entity authorized by the copyright owner that is
granting the License.
"Legal Entity" shall mean the union of the
acting entity and all other entities that control,
are controlled by, or are under common
control with that entity. For the purposes of
this defi nition, "control" means (i) the power,
direct or indirect, to cause the direction or
management of such entity, whether by contract
or otherwise, or (ii) ownership of fi fty percent
(50%) or more of the outstanding shares, or
(iii) benefi cial ownership of such entity.
"You" (or "Your") shall mean an individual or
Legal Entity exercising permissions granted by
this License.
"Source" form shall mean the preferred form
for making modifi cations, including but not
limited to software source code, documentation
source, and confi guration fi les.
BY
"Object" form shall mean any form resulting
from mechanical transformation or translation
of a Source form, including but not
limited to compiled object code, generated
documentation, and conversions to other media
OF
types.
"Work" shall mean the work of authorship,
whether in Source or Object form, made
available under the License, as indicated by a
copyright notice that is included in or attached
to the work (an example is provided in the
Appendix below).
– Continued on next page –
OR

Advertisement

Table of Contents
loading

Summary of Contents for Sony STR-DN850

  • Page 1 ON ANY THEORY OF LIABILITY, WHETHER System. TORS “AS IS” AND ANY EXPRESS OR IM- IN CONTRACT, STRICT LIABILITY, OR MICROVAULT is a trademark of Sony Corpora- * Manufactured under license from Dolby Labo- PLIED WARRANTIES, INCLUDING, BUT TORT (INCLUDING NEGLIGENCE tion.
  • Page 2 STR-DN850 “Derivative Works” shall mean any work, 5. Submission of Contributions. Unless You ex- or (ii) ownership of fi fty percent (50%) or more fi le, excluding those notices that do not whether in Source or Object form, that is based plicitly state otherwise, any Contribution in- of the outstanding shares, or (iii) benefi...
  • Page 3 STR-DN850 WARRANTIES OR CONDITIONS OF ANY FastDelegate You agree not to advertise or in any way imply any general, special, incidental or consequential KIND, either express or implied. that this Work is a product of Your own. damages arising in connection to this license. The http://www.codeproject.com/KB/cpp/FastDel-...
  • Page 4 STR-DN850 Ver. 1.1 CONSEQUENTIAL DAMAGES (INCLUDING, Redistributions in binary form must reproduce SPECIFICATIONS BUT NOT LIMITED TO, PROCUREMENT OF the above copyright notice, this list of conditions SUBSTITUTE GOODS OR SERVICES; LOSS and the following disclaimer in the documenta- OF USE, DATA, OR PROFITS; OR BUSINESS...
  • Page 5 STR-DN850 Ver. 1.2 Bluetooth section HDMI Video Communication system Input/Output (HDMI Repeater block) Bluetooth Specifi cation version 3.0 Output Bluetooth Specifi cation Power Class 2 Format Side-by-Side Over-Under Maximum communication range Frame packing (Half) (Top-and-Bottom) Line of sight approx. 10 m (33 feet) Frequency band 4096 ×...
  • Page 6 LES DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT CRITIQUES POUR LA SÉCURITÉ DE FONC- TIONNEMENT. NE REMPLACER CES COMPOSANTS QUE PAR DES PIÈCES SONY DONT LES NUMÉROS SONT DON- NÉS DANS CE MANUEL OU DANS LES SUPPLÉMENTS PUBLIÉS PAR SONY.
  • Page 7: Table Of Contents

    STR-DN850 TABLE OF CONTENTS SERVICING NOTES 5-28. Printed Wiring Board - STANDBY Board - ....53 ..........5-29. Schematic Diagram - STANDBY Board - ...... 54 5-30. Printed Wiring Board - FRONT JACK Board - ....55 DISASSEMBLY 5-31. Schematic Diagram - FRONT JACK Board - ....55 2-1.
  • Page 8: Servicing Notes

    STR-DN850 Ver. 1.2 SECTION 1 SERVICING NOTES MODEL IDENTIFICATION NOTE OF REPLACING THE Q550, Q551, Q600, Q601, –BACK PANEL– Q650, Q651, Q700, Q701, Q750, Q751, Q800, Q801, Q850 AND Q851 ON THE MAIN BOARD Replacement of Q550, Q551, Q600, Q601, Q650, Q651, Q700, Q701, Q750, Q751, Q800, Q801, Q850 and Q851 on the MAIN board used in this unit requires L type screw driver.
  • Page 9 STR-DN850 Ver. 1.1 NOTE OF REPLACING THE IC1906, IC1907, IC1908, CAPACITOR ELECTRICAL DISCHARGE PROCESSING IC1909 OR IC1910 ON THE DCDC BOARD When checking the board, for the electric shock prevention, Replacement of IC1906, IC1907, IC1908, IC1909 or IC1910 on the...
  • Page 10 If any problem You can clear all memorized settings and Be sure to use the buttons on the receiver persists, consult your nearest Sony dealer. restore the receiver to the factory default to perform this operation.
  • Page 11 – you may have to press N twice. Bluetooth device. – you may need to start playback of an audio source on the For example, select “STR-DN850”. If passkey is required on Bluetooth device. the Bluetooth device, enter “0000”. 7. Perform the Bluetooth connection on the Bluetooth device.
  • Page 12 STR-DN850...
  • Page 13 STR-DN850...
  • Page 14 STR-DN850...
  • Page 15 STR-DN850...
  • Page 16 STR-DN850...
  • Page 17: Disassembly

    STR-DN850 SECTION 2 DISASSEMBLY • This set can be disassembled in the order shown below. 2-1. DISASSEMBLY FLOW 2-2. CASE (ENTRY) (Page 17) 2-3. FRONT PANEL SECTION 2-4. DIGITAL BOARD, NETWORK BOARD (Page 18) (Page 19) 2-5. BACK PANEL SECTION (Page 19) 2-6.
  • Page 18: Front Panel Section

    STR-DN850 2-3. FRONT PANEL SECTION 1 CN4000 (5P) 5 CN391 (4P) 3 Wire is removed from the pin, lead. 7 front panel section wire (flat type) (29 core) (CN2101) wire (flat type) (14 core) (CN4800) 6 five screws (+BVTP 3...
  • Page 19: Digital Board, Network Board

    STR-DN850 2-4. DIGITAL BOARD, NETWORK BOARD qg heat sink, HDMI qh sheet, radiation 2 two screws (+BVTP 3 qs three screws 4 NETWORK board (+BVTP 3 qf bracket, HDMI qs two screws (+BVTP 3 qj DIGITAL board 3 CN7002 (120P)
  • Page 20: Standby Board, Main Board Section

    STR-DN850 2-6. STANDBY BOARD, MAIN BOARD SECTION 2 four screws (+BVTP 3 7 two screws (+BVTP 3 4 Wire is removed from the pin, lead. 3 STANDBY board 7 two screws (+BVTP 3 1 CNP902 (4P) MAIN board 9 MAIN BOARD...
  • Page 21: Test Mode

    STR-DN850 SECTION 3 TEST MODE TUNER AM STEP CHANGE MODE KEY CHECK MODE (US and Canadian models only) Each button can be checked. Procedure: Either the 9 kHz step or 10 kHz step can be selected for the AM channel step.
  • Page 22 STR-DN850 HISTORY MODE USB UPDATE TEST MODE The state that the set is used is memorized. To update micontroller software through USB. Procedure: Procedure: 1. While pressing [SPEAKERS] and [DISPLAY] buttons 1. Copy the zip file into a blank USB memory, then unzip it.
  • Page 23 STR-DN850 FIX MODEL AND DESTINATION MODE 11. The message “DESTINY” appears. This mode is to fi x the set for model & destination. 12. Go to MODEL & DESTINATION check and press the [ ] key of remote commander. When turning on the set, the message below appears if the setting is not fi...
  • Page 24: Fm Tuner Check

    STR-DN850 SECTION 4 FM TUNER CHECK FM AUTO STOP CHECK signal generator Procedure: 1. Turn on the set. 2. Input the following signal from signal generator to FM antenna input directly. Carrier frequency : A = 87.5 MHz, B = 98 MHz, C = 108 MHz...
  • Page 25: Diagrams

    STR-DN850 SECTION 5 DIAGRAMS 5-1. BLOCK DIAGRAM – ANALOG AUDIO Section – DIR FUNCTION SELECT IC421 J402 (1/2) INL11 AUDIO TV IN R-ch R-ch INR11 >001B ADCLOUT L-IN J401 DIGITAL SECTION R-ch ADCROUT (Page 26) INL7 AUDIO SA-CD/CD IN R-ch...
  • Page 26: Block Diagram - Digital Section

    STR-DN850 5-2. BLOCK DIAGRAM – DIGITAL Section – DIGITAL AUDIO INTERFACE RECEIVER D/A CONVERTER IC2107 IC2104 IC2502 VOUT1 FL OUT SBL/SBR_OUT L/R_IN DATA4 >001B VOUT2 R-CH DATAOUT DIR_IN SL/SR_OUT DATA3 ANALOG AUDIO SECTION L-IN ADINL MPOUT4 A/D_2CH VOUT7 SBL OUT...
  • Page 27: Block Diagram - Amp Section

    STR-DN850 5-3. BLOCK DIAGRAM – AMP Section – J101 POWER AMP PHONES BOOSTER Q620 Q600 Q622 CURRENT CURRENT LIMITER RELAY DETECT DETECT D600 Q624 Q602, Q603 DRIVER Q604 Q605 Q625 Q375 BOOSTER RY920 TB501 (1/2) Q601 BOOSTER FRONT A Q670...
  • Page 28: Block Diagram - Analog Video/Usb Section

    STR-DN850 5-4. BLOCK DIAGRAM – ANALOG VIDEO/USB Section – J202 (1/2) J202 (2/2) VIDEO VIN1 VIDEO IN VIDEO OUT 1 MONITOR OUT VIDEO VIN2 SAT/CATV IN VIDEO DRIVER IC233 MUTE >004B PROTECTION BT_R Q281 ~ Q283 ANALOG AUDIO SECTION BT_L...
  • Page 29: Block Diagram - Digital Video Section

    STR-DN850 5-5. BLOCK DIAGRAM – DIGITAL VIDEO Section – D/A DIGITAL SIGNAL PROCESSORS CN3505 AND CONTROLLERS DATA2+ R4X2+ IC3202 DATA2– R4X2- CN3201 DATA1+ DATA2+ R4X1+ T0X2+ RX_2P TX1_2+ DATA1– DATA2– R4X1- T0X2- TX1_2- RX_2N DATA0+ DATA1+ R4X0+ T0X1+ RX_1P TX1_1+ DATA0–...
  • Page 30: Block Diagram - Display/Power Section

    STR-DN850 Ver. 1.2 5-6. BLOCK DIAGRAM – DISPLAY/POWER Section – VACUUM FLOURESCENT RELAY DRIVE BRIDGEABLE_RY DISPLAY Q920 ND100 RY920 LED DRIVER WHITE_LED (PURE DIRECT) RECT Q102 D108 D921 F912 (VCC) LED DRIVER FLASH_CLK/POWER_LED Q110 AUDIO AMP 53 FL_LAT (ON/STBY) SECTION...
  • Page 31 STR-DN850 Ver. 1.1 THIS NOTE IS COMMON FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS. • Circuit Boards Location (In addition to this, the necessary note is printed in each block.) For Printed Wiring Boards. For Schematic Diagrams. Note: Note: DCDC board •...
  • Page 32: Digital Board (Component Side)

    STR-DN850 Ver. 1.2 5-7. PRINTED WIRING BOARD – DIGITAL Board (Component Side) – • See page 31 for Circuit Boards Location. • : Uses unleaded solder. DIGITAL BOARD (COMPONENT SIDE) J2100 COAXIAL SA-CD/CD (ASSIGNABLE) IN HDMI IN J7000 CN3201 (for AUDIO)
  • Page 33: Printed Wiring Board - Digital Board (Conductor Side)

    STR-DN850 Ver. 1.2 5-8. PRINTED WIRING BOARD – DIGITAL Board (Conductor Side) – • See page 31 for Circuit Boards Location. • : Uses unleaded solder. DIGITAL BOARD (CONDUCTOR SIDE) Q2107 CL3233 CL2111 CL3005 CL3010 R3450 JL2109 C3602 R3509 R3503...
  • Page 34: Schematic Diagram - Digital Board (1/9)

    STR-DN850 Ver. 1.2 5-9. SCHEMATIC DIAGRAM – DIGITAL Board (1/9) – • See page 58 for Waveforms. • See page 59 for IC Block Diagrams. >001S DIGITAL BOARD (1/9) DIGITAL BOARD (4/9) >006S >007S (Page 37) DIGITAL BOARD DIGITAL BOARD...
  • Page 35: Schematic Diagram - Digital Board (2/9)

    STR-DN850 5-10. SCHEMATIC DIAGRAM – DIGITAL Board (2/9) – • See page 58 for Waveforms. • See page 59 for IC Block Diagrams. • See page 66 for IC Pin Function Descriptions. >003S DIGITAL BOARD (2/9) DIGITAL BOARD (1/9) >011S...
  • Page 36: Schematic Diagram - Digital Board (3/9)

    STR-DN850 Ver. 1.2 5-11. SCHEMATIC DIAGRAM – DIGITAL Board (3/9) – • See page 58 for Waveforms. • See page 59 for IC Block Diagrams. DIGITAL BOARD (3/9) +3.3V X2500 25MHz R2585 R2551 DSP_MOSI D2500 C2543 C2544 DSP_MISO CES521 R2552...
  • Page 37: Schematic Diagram - Digital Board (4/9)

    STR-DN850 Ver. 1.2 5-12. SCHEMATIC DIAGRAM – DIGITAL Board (4/9) – • See page 58 for Waveforms. • See page 59 for IC Block Diagrams. • See page 66 for IC Pin Function Descriptions. DIGITAL BOARD (4/9) >006S IC3001 RESET...
  • Page 38: Schematic Diagram - Digital Board (5/9)

    STR-DN850 5-13. SCHEMATIC DIAGRAM – DIGITAL Board (5/9) – • See page 66 for IC Pin Function Descriptions. DIGITAL BOARD (5/9) R3433 4.7k R3429 4.7k R3430 4.7k C3346 C3348 0.15u 0.15u R3427 4.7k R3434 4.7k R3342 R3354 R3432 4.7k R3343...
  • Page 39: Schematic Diagram - Digital Board (6/9)

    STR-DN850 Ver. 1.2 5-14. SCHEMATIC DIAGRAM – DIGITAL Board (6/9) – DIGITAL BOARD (6/9) IC3203 W971GG6KB-18-ER25 IC3203 SD-RAM FB3204 C3218 C3338 0.1u VDDQ_G9 VSSQ_H8 C3212 0.1u C3337 0.1u DVDD_DDR VDDQ_G7 VSSQ_H2 C3213 0.1u C3336 0.1u DVDD_DDR VDDQ_G3 VSSQ_F8 FB3201 C3214 0.1u...
  • Page 40: Schematic Diagram - Digital Board (7/9)

    STR-DN850 Ver. 1.2 5-15. SCHEMATIC DIAGRAM – DIGITAL Board (7/9) – • See page 59 for IC Block Diagrams. >029S DIGITAL BOARD (5/9) (Page 38) 28 29 DIGITAL BOARD (7/9) >005S DIGITAL BOARD (1/9), (8/9) (Page 34), (Page 41) >022S DIGITAL BOARD >027S...
  • Page 41: Schematic Diagram - Digital Board (8/9)

    STR-DN850 5-16. SCHEMATIC DIAGRAM – DIGITAL Board (8/9) – • See page 58 for Waveforms. • See page 59 for IC Block Diagrams. >023S DIGITAL BOARD (8/9) DIGITAL BOARD (4/9) R3500 IN5_HPD (Page 37) HOT PLUG DET R3501 IN5_5VP +5V POWER >016S...
  • Page 42: Schematic Diagram - Digital Board (9/9)

    STR-DN850 5-17. SCHEMATIC DIAGRAM – DIGITAL Board (9/9) – • See page 59 for IC Block Diagrams. DIGITAL BOARD (9/9) >012S >020S DIGITAL DIGITAL BOARD NW_MUTE BOARD NW_RESET (1/9) (4/9) CL7049 +NW_3.3V (Page 34) (Page 37) CL7050 R7049 R7050 R7051 7.5k...
  • Page 43: Main Board (Component Side)

    STR-DN850 5-18. PRINTED WIRING BOARD – MAIN Board (Component Side) – • See page 31 for Circuit Boards Location. • : Uses unleaded solder. MAIN BOARD (COMPONENT SIDE) TB501 TB502 TB503 J401 SURROUND BACK/ BI-AMP/ J202 FRONT A CENTER SURROUND...
  • Page 44: Main Board (Conductor Side)

    STR-DN850 5-19. PRINTED WIRING BOARD – MAIN Board (Conductor Side) – • See page 31 for Circuit Boards Location. • : Uses unleaded solder. MAIN BOARD (CONDUCTOR SIDE) CL408 C401 CL241 JL261 JL263 CL233 CL339 CL227 CL230 CL229 CL232 CC65...
  • Page 45: Schematic Diagram - Main Board (1/4)

    STR-DN850 Ver. 1.1 5-20. SCHEMATIC DIAGRAM – MAIN Board (1/4) – MAIN BOARD (1/4) >032S MAIN BOARD (2/4) (Page 46) [SL] [SBR] [SBL] [SR] [FR] [FL] R568 R868 R818 R668 R768 R618 R718 R550 R551 R850 R851 R800 R801 R650...
  • Page 46: Schematic Diagram - Main Board (2/4)

    STR-DN850 Ver. 1.2 5-21. SCHEMATIC DIAGRAM – MAIN Board (2/4) – MAIN BOARD (2/4) CN391 >036S RY921 CL364 R991 R992 HP DETECT HEADPHONE CL362 R-CH BOARD R989 R990 CL363 CN107 L-CH (Page 58) C322 0.01u ET301 D375 DA2J10100L CL354 (CHASSIS)
  • Page 47: Schematic Diagram - Main Board (3/4)

    STR-DN850 5-22. SCHEMATIC DIAGRAM – MAIN Board (3/4) – • See page 59 for IC Block Diagrams. >041S >042S TUNER1 BOARD MAIN BOARD CN101 (4/4) >040S (Page 56) (Page 48) >043S MAIN BOARD MAIN BOARD (4/4) (4/4) (Page 48) (Page 48)
  • Page 48: Schematic Diagram - Main Board (4/4)

    STR-DN850 Ver. 1.2 5-23. SCHEMATIC DIAGRAM – MAIN Board (4/4) – • See page 59 for IC Block Diagrams. >043S >033S MAIN BOARD (3/4) MAIN BOARD (1/4) (Page 47) (Page 45) 15 16 MAIN BOARD (4/4) >040S MAIN BOARD (3/4)
  • Page 49: Printed Wiring Boards - Panel Section

    STR-DN850 Ver. 1.1 5-24. PRINTED WIRING BOARDS – PANEL Section – • See page 31 for Circuit Boards Location. • : Uses unleaded solder. DIGITAL DISPLAY BOARD BOARD T100 >002P CN2101 (Page 32) CL117 CL119 CL137 CL129 CL116 ND100 R159...
  • Page 50: Schematic Diagram - Panel Section

    STR-DN850 5-25. SCHEMATIC DIAGRAM – PANEL Section – >019S DIGITAL BOARD (2/9) CN2101 (Page 35) CN102 DISPLAY BOARD R143 D108 SLI-325DCT31W R142 R158 C136 R159 0.1u (PURE DIRECT) R160 C139 R161 0.1u Q102 2PD601ART ND100 Q101 LED DRIVER VACUUM FLOURESCENT DISPLAY...
  • Page 51: Printed Wiring Board - Dcdc Board

    STR-DN850 Ver. 1.1 5-26. PRINTED WIRING BOARD – DCDC Board – • See page 31 for Circuit Boards Location. • : Uses unleaded solder. DCDC BOARD (COMPONENT SIDE) POWER DIGITAL STANDBY TRANSFORMER BOARD BOARD >007P >014P >015P (MAIN) CN1501 CN940...
  • Page 52: Schematic Diagram - Dcdc Board

    STR-DN850 5-27. SCHEMATIC DIAGRAM – DCDC Board – DCDC BOARD R1937 100k L1908 10uH D923 D5SBA60-F C1981 >047S R1931 F940 0.1u CN941 R1935 3.15A 250V L1901 BOOT CL986 IC1908 POWER 10uH 10.6 CL984 C907 RT8293ALZSP R3 AC (YEL) R1936 0.047u...
  • Page 53: Printed Wiring Board - Standby Board

    STR-DN850 Ver. 1.2 5-28. PRINTED WIRING BOARD – STANDBY Board – • See page 31 for Circuit Boards Location. • : Uses unleaded solder. STANDBY BOARD STANDBY BOARD (COMPONENT SIDE) (CONDUCTOR SIDE) JR902 T902 POWER TRANSFORMER (SUB) DIGITAL BOARD C961...
  • Page 54: Schematic Diagram - Standby Board

    STR-DN850 Ver. 1.2 5-29. SCHEMATIC DIAGRAM – STANDBY Board – >038S MAIN BOARD (2/4) STANDBY BOARD CNP920 (Page 46) CNP902 >037S 1 LIVE FH902 MAIN BOARD (2/4) F901 T901 T3.15AL 250V POWER CNP930 4 NEUTRAL R972 R971 (EXCEPT US, CND)
  • Page 55: Printed Wiring Board - Front Jack Board

    STR-DN850 5-30. PRINTED WIRING BOARD – FRONT JACK Board – 5-32. PRINTED WIRING BOARD – TUNER1 Board – • • • See page 31 for Circuit Boards Location. : Uses unleaded solder. • See page 31 for Circuit Boards Location.
  • Page 56: Schematic Diagram - Tuner1 Board

    STR-DN850 5-33. SCHEMATIC DIAGRAM – TUNER1 Board – • See page 59 for IC Block Diagrams. TUNER1 BOARD JL132 JL130 R113 R104 JL121 JL123 CN101 VDD 11 C101 JL102 JL122 ARF1 470p CK (for IIC) JL131 GND 12 JL103 IIC/RDSI >041S...
  • Page 57: Printed Wiring Board - Power Key Board

    STR-DN850 5-34. PRINTED WIRING BOARD – POWER KEY Board – 5-35. SCHEMATIC DIAGRAM – POWER KEY Board – • • See page 31 for Circuit Boards Location. : Uses unleaded solder. POWER KEY BOARD POWER KEY BOARD S114 R183 SPEAKERS...
  • Page 58: Printed Wiring Board - Headphone Board

    STR-DN850 5-36. PRINTED WIRING BOARD – HEADPHONE Board – • Waveforms • • See page 31 for Circuit Boards Location. : Uses unleaded solder. – DIGITAL Board – IC2100 rk (PE2/X0) IC2107 3 (MCKIN) IC2107 qh (DATAOUT) HEADPHONE BOARD J101 PHONES 8.8 Vp-p...
  • Page 59 STR-DN850 • IC Block Diagrams IC2101 BU4229F-TR (DIGITAL BOARD (2/9)) IC3001 BU4229F-TR (DIGITAL BOARD (4/9)) OUT 1 VDD 2 – DELAY CIRCUIT VREF VSS 3 IC2102 BR24T64FJ-WE2 (DIGITAL BOARD (2/9)) 1Kbit~1024Kbit EEPROM array 8bit 7bit 13bit Address Word Data 8bit...
  • Page 60 STR-DN850 IC2107 LC89075WA-H (DIGITAL BOARD (1/9)) PVDD OPTICAL TV PGND OPTICAL SAT HDMI MCK HDMI SPDIF HDMI BCK Group: A Stereo ARC SPDIF Group: B HDMI LRCK Group: C (4x6):4 Group: D USB SPDIF COAXIAL IN Group: D (Input) Group: C (Input)
  • Page 61 STR-DN850 Ver. 1.2 IC2111 TC74VHC393FT (ELK) (DIGITAL BOARD (1/9)) CLEAR CLEAR IC2501 W9864G6KH-6-ER10 (DIGITAL BOARD (3/9)) VSS 54 DQ15 53 VSSQ 52 VDDQ CLOCK DQ14 51 BUFFER DQ13 50 VDDQ 49 VSSQ COLUMN DECODER DQ12 48 COLUMN DECODER CONTROL DQ11 47...
  • Page 62 STR-DN850 Ver. 1.2 IC2503 W25Q16DVSSIG (DIGITAL BOARD (3/9)) Write Control Logic HOLD Status Register High Voltage Generators Page Address Latch / Counter Command and Column Decode Control Logic and 256 Byte Page Buffer Data Byte Address Latch / Counter IC3002 TC74VHC157FT (EK) (DIGITAL BOARD (4/9))
  • Page 63 STR-DN850 Ver. 1.2 IC3206 W25Q128FVEIG (DIGITAL BOARD (7/9)) Write Control Logic HOLD Status Register High Voltage Generators Page Address Latch / Counter Command and Column Decode Control Logic and 256 Byte Page Buffer Data Byte Address Latch / Counter IC3514 TPS2553DBVR (DIGITAL BOARD (8/9))
  • Page 64 STR-DN850 IC421 BD3470KS2 (MAIN BOARD (4/4)) INL2 AGND INR2 FRIN2 INL1 FLIN2 SWIN2 INR1 Multi2 CIN2 AGND Multi1 SBLIN1 SRIN2 SLIN2 SBRIN1 Mode Mode Mode Mode SLIN1 SBRIN2 selector selector selector selector SRIN1 SBLIN2 CIN1 AGND RECR1 SWIN1 FLIN1 RECL1...
  • Page 65 STR-DN850 IC101 RZ5B801-0001E2 (TUNER1 BOARD) (US and Canadian models) IISD GND 1 IISD VDDRF CP2 3 FM Antenna Digital Signal Process LOUT Filter Digital Stereo FRF1 4 Mixer Demodulator Decoder FM LNA ROUT Digital Demodulator LRCK GNDRF 5 LRCK / LOUT...
  • Page 66 STR-DN850 • IC Pin Function Descriptions DIGITAL BOARD (2/9) IC2100 MB9AF156NPMC-G-JNK1E2 (SYSTEM CONTROL) Pin No. Pin Name Description Power supply pin (+3.3V) EVOL_CLK I2C clock signal output to the electrical volume EVOL_DATA I2C data output to electrical volume HP_DET Headphone detection signal input...
  • Page 67 STR-DN850 Pin No. Pin Name Description FL_CLK Clock signal output for FL DISPLAY DRIVER IC HDMI_CECIN CEC serial data input from the HDMI connector AD_KEY1 Key signal input (A/D port) AD_KEY2 Key signal input (A/D port) SIRCS_IN SIRCS signal input...
  • Page 68 STR-DN850 DIGITAL BOARD (4/9) IC3000 MB9BF118TPMC-GE1 (HDMI CONTROLLER) Pin No. Pin Name Description Power supply pin (+3.3V) NO_USE Not used NO_USE Not used NO_USE Not used NO_USE Not used NO_USE Not used NFC_SW NFC standby control signal output terminal NO_USE...
  • Page 69 STR-DN850 Pin No. Pin Name Description Power supply pin (+3.3V) NO_USE Not used NO_USE Not used INITX Video Micom reset port NW_SPI_DIN NETWORK SPI Data In NW_SPI_DOUT NETWORK SPI Data Out NW_SPI_CLK NETWORK SPI Clock NO_USE Not used NO_USE Not used...
  • Page 70 STR-DN850 Pin No. Pin Name Description Ground terminal VURX Communication data with MAIN Micom: Receive data VUTX_VU_SDA Communication data with MAIN Micom: Transmit data NO_USE Not used NO_USE Not used UPDATE_VURX Update to MAIN Micom data input (program main micom data pin)
  • Page 71 STR-DN850 Pin No. Pin Name Description NO_USE Not used MHL1_PCONT MHL1 Power Control NO_USE Not used (only 1 MHL) NO_USE Not used (only 1 MHL) SPARTA_INT HDMI device interrupt port SPARTA_RST HDMI device reset control port MHL1_OVC MHL1 Over Current detection...
  • Page 72 STR-DN850 DIGITAL BOARD (5/9) IC3202 ADV8003KBCZ-8B (D/A DIGITAL SIGNAL PROCESSORS AND CONTROLLERS) Pin No. Pin Name Description OSD_IN[23]/ OSD video data or video data input terminal Not used EXT_DIN[7] OSD_DE Data enable signal input terminal Not used OSD_CLK/EXT_CLK Video clock signal input terminal...
  • Page 73 STR-DN850 Pin No. Pin Name Description RX_HPD Hot plug detection signal output to the HDMI transceiver AVDD1 Power supply terminal (+3.3V) C18, C19 Ground terminal C20, C21 AVDD1 Power supply terminal (+3.3V) C22, C23 DAC5, DAC6 Component video signal output to the video input selector...
  • Page 74 STR-DN850 Pin No. Pin Name Description H7 to H17 Ground terminal H20, H21 Ground terminal TX1_2+ TMDS data (positive) output to the HDMI OUT A ARC connector TX1_2– TMDS data (negative) output to the HDMI OUT A ARC connector Data enable signal input from the video A/D converter...
  • Page 75 STR-DN850 Pin No. Pin Name Description T1, T2 P[14], P[15] Digital video signal input from the video A/D converter T3, T4 Ground terminal T7 to T17 Ground terminal HPD_TX2 Hot plug detection signal input from the HDMI OUT B connector...
  • Page 76 STR-DN850 Pin No. Pin Name Description DVDD_DDR Power supply terminal (+1.8V) DDR_/DQS[3] Data strobe signal output to the SD-RAM DDR_A[13] Address signal output terminal Not used DDR_A[8] Address signal output to the SD-RAM AA10 DVDD_DDR Power supply terminal (+1.8V) AA11...
  • Page 77: Exploded Views

    STR-DN850 SECTION 6 Ver. 1.1 EXPLODED VIEWS Note: • -XX and -X mean standardized parts, so • Abbreviation The components identifi ed by mark 0 they may have some difference from the : Australian model or dotted line with mark 0 are critical for original one.
  • Page 78: Front Panel Section

    STR-DN850 6-2. FRONT PANEL SECTION not supplied (NFC ICON PC board) not supplied not supplied (HP SUPPORT board) not supplied (HEADPHONE board) ND100 EN100 EN101 supplied with EN100 supplied with EN101 Note: If wire (fl at type) is replaced, install it after bending it in the same form as that before replacement.
  • Page 79: Digital Board

    STR-DN850 Ver. 1.1 6-3. DIGITAL BOARD not supplied not supplied not supplied back panel section Note: If wire (fl at type) is replaced, install it after bending it in the same form as that before replacement. Ref. No. Part No.
  • Page 80: Back Panel Section

    STR-DN850 Ver. 1.2 6-4. BACK PANEL SECTION not supplied not supplied (GND BRACKET board) not supplied (TUNER1 board) supplied not supplied supplied not supplied chassis section Note: If wire (fl at type) is replaced, install it after bending it in the same form as that before replacement.
  • Page 81: Chassis Section

    STR-DN850 Ver. 1.2 6-5. CHASSIS SECTION supplied with Q550, Q551, Q601 Q600, Q601, Q650, Q651, Q700 Q600 Q700, Q701, Q750, Q751, Q701 Q751 Q800, Q801, Q850, Q851 Q550 Q750 Q551 Q651 Q650 not supplied Q801 (USB INSULATION Q800 Q851 MT PC board)
  • Page 82: Electrical Parts List

    STR-DN850 Ver. 1.2 SECTION 7 DCDC ELECTRICAL PARTS LIST Note: The components identifi ed by mark 0 • Due to standardization, replacements in • COILS or dotted line with mark 0 are critical for the parts list may be different from the uH: μH...
  • Page 83 STR-DN850 Ver. 1.1 DCDC DIGITAL Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 0 F941 1-523-086-11 FUSE (3.15A/250V) A-1989-891-A DIGITAL BOARD, COMPLETE (for SERVICE) *********************** < IC > < CAPACITOR > IC1906 6-717-879-01 IC RT8293ALZSP IC1907...
  • Page 84 STR-DN850 Ver. 1.2 DIGITAL Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark * C2181 1-118-035-11 CERAMIC CHIP 0.1uF C2543 1-164-850-11 CERAMIC CHIP 10PF 0.5PF C2184 1-164-874-11 CERAMIC CHIP 100PF C2544 1-164-858-11 CERAMIC CHIP 22PF C2185 1-164-874-11...
  • Page 85 STR-DN850 Ver. 1.1 DIGITAL Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark * C3027 1-118-035-11 CERAMIC CHIP 0.1uF * C3286 1-118-035-11 CERAMIC CHIP 0.1uF C3028 1-116-724-11 CERAMIC CHIP 4.7uF 6.3V * C3287 1-118-035-11 CERAMIC CHIP 0.1uF...
  • Page 86 STR-DN850 Ver. 1.2 DIGITAL Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C3361 1-116-737-11 CERAMIC CHIP 1uF C3568 1-116-724-11 CERAMIC CHIP 4.7uF 6.3V C3363 1-116-737-11 CERAMIC CHIP 1uF C3569 1-116-737-11 CERAMIC CHIP 1uF C3364 1-116-737-11 CERAMIC CHIP 1uF...
  • Page 87 STR-DN850 Ver. 1.2 DIGITAL Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark < DIODE > < IC > D2101 6-503-738-01 DI CES521 IC2100 A-1989-893-A IC MB9AF156NPMC-G-JNK1E2 (for SERVICE) D2102 6-503-738-01 DI CES521 IC2101 6-719-856-01 IC BU4229F-TR...
  • Page 88 STR-DN850 Ver. 1.2 DIGITAL Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark Q3004 6-552-936-01 LTC014EUBFS8TL R2187 1-208-883-81 METAL CHIP 0.5% 1/16W Q3005 6-553-007-01 PMG85XP R2188 1-218-947-11 METAL CHIP 1/16W R2189 1-208-860-81 METAL CHIP 0.5% 1/16W < RESISTOR >...
  • Page 89 STR-DN850 Ver. 1.2 DIGITAL Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R2269 1-218-990-81 SHORT CHIP R2518 1-216-811-11 METAL CHIP 1/10W R2270 1-218-945-11 METAL CHIP 1/16W R2519 1-216-811-11 METAL CHIP 1/10W R2282 1-218-973-11 METAL CHIP 1/16W...
  • Page 90 STR-DN850 Ver. 1.2 DIGITAL Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R2589 1-218-965-11 METAL CHIP 1/16W R3088 1-218-941-81 METAL CHIP 1/16W R2590 1-218-957-11 METAL CHIP 2.2K 1/16W R3089 1-218-941-81 METAL CHIP 1/16W R3001 1-218-965-11 METAL CHIP...
  • Page 91 STR-DN850 Ver. 1.2 DIGITAL Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R3242 1-218-937-11 METAL CHIP 1/16W R3320 1-218-933-11 METAL CHIP 1/16W R3244 1-218-933-11 METAL CHIP 1/16W R3323 1-218-990-81 SHORT CHIP R3245 1-208-683-11 METAL CHIP 0.5%...
  • Page 92 STR-DN850 Ver. 1.2 DIGITAL Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R3410 1-218-958-11 METAL CHIP 2.7K 1/16W R3578 1-218-957-11 METAL CHIP 2.2K 1/16W R3411 1-208-699-11 METAL CHIP 4.7K 0.5% 1/16W R3579 1-218-990-81 SHORT CHIP R3412...
  • Page 93 STR-DN850 Ver. 1.2 DIGITAL DISPLAY Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R3725 1-218-965-11 METAL CHIP 1/16W RB2106 1-234-372-11 RES, NETWORK 100 (1005X4) R3726 1-218-965-11 METAL CHIP 1/16W RB2107 1-234-372-11 RES, NETWORK 100 (1005X4) R3727...
  • Page 94 STR-DN850 Ver. 1.2 DISPLAY Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark D105 6-502-968-01 DI DZ2J062M0L JR160 1-216-296-11 SHORT CHIP D106 6-500-400-01 DIODE BAV99-215 JR162 1-216-296-11 SHORT CHIP D107 6-500-400-01 DIODE BAV99-215 JR163 1-216-296-11 SHORT CHIP...
  • Page 95 STR-DN850 Ver. 1.2 DISPLAY FRONT JACK HEADPHONE MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R129 1-216-845-11 METAL CHIP 100K 1/10W < DIODE > R130 1-250-616-11 METAL CHIP 1/10W R131 1-250-624-11 METAL CHIP 2.2K 1/10W...
  • Page 96 STR-DN850 Ver. 1.2 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C323 1-126-923-91 ELECT 220uF C592 1-114-128-91 CERAMIC CHIP 47PF 100V C325 1-126-964-11 ELECT 10uF C601 1-162-960-11 CERAMIC CHIP 220PF C350 1-114-507-11 CERAMIC CHIP 1uF...
  • Page 97 STR-DN850 Ver. 1.2 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C760 1-126-964-11 ELECT 10uF CC12 1-118-345-11 CERAMIC CHIP 0.01uF C762 1-118-291-11 CERAMIC CHIP 100PF CC13 1-118-345-11 CERAMIC CHIP 0.01uF C763 1-126-923-91 ELECT 220uF CC14 1-118-345-11 CERAMIC CHIP 0.01uF...
  • Page 98 STR-DN850 Ver. 1.2 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark D750 6-502-961-01 DI DA2J10100L J402 1-843-546-11 JACK, PIN 4P D751 6-502-961-01 DI DA2J10100L (AUDIO TV IN L/R /SUBWOOFER OUT) D770 6-502-961-01 DI DA2J10100L < COIL >...
  • Page 99 STR-DN850 Ver. 1.2 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark Q753 8-729-023-22 TRANSISTOR 2SD2114K R361 1-249-399-11 CARBON 1/4W Q754 6-553-400-01 MSB92T1G Q755 6-553-400-01 MSB92T1G R363 1-216-841-11 METAL CHIP 1/10W R365 1-249-399-11 CARBON 1/4W Q770...
  • Page 100 STR-DN850 Ver. 1.2 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R566 1-218-841-11 METAL CHIP 0.5% 1/10W R665 1-216-823-11 METAL CHIP 1.5K 1/10W R567 1-249-405-11 CARBON 1/4W R666 1-218-841-11 METAL CHIP 0.5% 1/10W R568 1-216-841-11...
  • Page 101 STR-DN850 Ver. 1.2 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R757 1-216-841-11 METAL CHIP 1/10W R858 1-240-855-91 CARBON 6.2K 1/4W R758 1-240-855-91 CARBON 6.2K 1/4W R859 1-216-845-11 METAL CHIP 100K 1/10W R759 1-216-845-11 METAL CHIP...
  • Page 102 STR-DN850 Ver. 1.2 MAIN POWER KEY STANDBY Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark < TERMINAL > C980 1-114-802-11 CERAMIC CHIP 0.0033uF C981 1-116-713-11 CERAMIC CHIP 22uF TB501 1-854-007-11 TERMINAL BOARD, SPEAKER 6P C982 1-116-713-11 CERAMIC CHIP 22uF (SPEAKERS IMPEDANCE USE 6-16Ω...
  • Page 103 STR-DN850 Ver. 1.2 TUNER1 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark TUNER1 BOARD < VIBRATOR > ************* X101 1-767-317-11 VIBRATOR, CRYSTAL (32.768kHz) < CAPACITOR > ************************************************************* C101 1-100-155-91 CERAMIC CHIP 470PF 100V MISCELLANEOUS C102 1-116-734-11...
  • Page 104 STR-DN850 MEMO...
  • Page 105 STR-DN850 REVISION HISTORY Ver. Date Description of Revision 2014.02 2014.05 Addition of Taiwan model. Add JW2000 and JW2001 in DIGITAL board for PWB section. Add LP1901 in DCDC board for PWB section. Change description of R480, R481, R482, R483, R484, R485 and R486 in MAIN board.
  • Page 106 STR-DN850 Ver. Date Description of Revision Delete of CN1901 in DCDC board for Electrical Part List section (Service code changed). Delete of ET301 in MAIN board for Electrical Part List section (Service code changed). Delete of the asterisk symbol for all [Network Standby] and the asterisk explanation in page 5.

Table of Contents