Sony STR-DN840 Operating Instructions Manual page 108

• Confirm that the network is correctly
set up. If it is not, the connection
cannot be made (page 90).
• The device on the device list is set to
"Not Allow" (page 62), or the device is
not added to the device list (page 62).
• A maximum of 20 connectable devices
has been set. Delete unnecessary
devices on the device list, and then set
"Auto Access" to "Allow" (page 62).
• Server operation of the receiver is
suspended if the receiver is conducting
one of the following operations.
– Playing a track stored on the server
(the receiver is operating as a player)
– Updating the software
– Formatting the system
The receiver cannot be turned on
automatically when accessed by
devices on the network.
• The receiver itself does not support the
Wake-on-LAN standard. Therefore the
receiver cannot be turned on by Wake-
on-LAN when "Network Standby" is
set to "Off". Set "Network Standby" to
"On" in Network Settings menu
(page 89) so that the receiver can
respond to operations by other devices
via a network (page 90).
Devices on the network cannot turn on
the receiver.
• The receiver cannot be turned on with
a Wake-on-LAN start up operated by
other devices on a network.
The receiver cannot play the track that
is currently being played by the PARTY
host.
• The PARTY host is playing a track of
an audio format that cannot be played
on the receiver.
• It may take a while before the playback
sound is output.
108
GB
The receiver joins an unintended
PARTY.
• If more than one PARTY has been
started when the receiver joins, the
receiver may not be able to join the
PARTY you want. Close the other
PARTY, and then join the PARTY you
want.
AirPlay
The receiver cannot be found from an
iOS device.
• Check your set-up of the firewall of the
security software. Refer to the website
(page 110) for details.
• Make sure the iOS device or the
computer with iTunes is connected to
your home network.
• Update the AirPlay software version of
the receiver and the iOS device to the
latest version (page 70).
The sound skips.
• The sound may skip depending on
factors such as the network
environment when you use a wireless
network.
• The servers are overloaded. Close all
unneeded applications you are
currently using.
This receiver cannot be operated.
• Update the software version of the iOS
device to the latest version (page 70).
• Update the software version of the
receiver to the latest version (page 70).
• Make sure another device is not
streaming to the AirPlay compatible
device at the same time.
2
Buttons such as
., >, SHUFFLE and REPEAT do
not work.
• Make sure that the settings that allow
iTunes to accept control from this
receiver are active.
+/–, N, X, x,