Tuner Operations; Listening To Fm/Am Radio - Sony STR-DN840 Operating Instructions Manual

Tuner Operations

Listening to FM/AM
radio
You can listen to FM and AM broadcasts
through the built-in tuner. Before
operation, be sure you have connected the
FM and AM antennas (aerials) to the
receiver (page 29).
Tip
The tuning scale for direct tuning is shown below.
Area
Europe, Australia
Mexico
* The AM tuning scale can be changed (page 48).
Numeric
buttons
D.TUNING
SHIFT
FM AM
50 kHz 9 kHz
50 kHz 10 kHz*
V/v/b,
OPTIONS
HOME
1
Select "Listen" from the home
menu, then press
2
Select "FM" or "AM" from the
menu, then press
The FM or AM menu list appears on
the TV screen.
FM/AM screen
You can select and operate each item
on the screen by pressing V/v/B/b and
.
1 Frequency indication (page 47)
2 Preset station list (page 48)
Tuning to a station
automatically (Auto
Tuning)
Select "Tuning +" or "Tuning –", then
press .
Select "Tuning +" to scan from lower to
higher frequency stations, select
"Tuning –" to scan from higher to lower
stations. The receiver stops scanning
whenever a station is received.
In case of poor FM stereo
reception
1
Tune in the station you want to listen
to using Auto Tuning, Direct Tuning
(page 48), or select the preset
station you want (page 48).
2
Press OPTIONS.
3
Select "FM Mode", then press
4
Select "Mono", then press
.
.
.
.
47
GB