Sony STR-DN840 Operating Instructions Manual page 96

a)
You can select this setting only when you have performed the Auto Calibration and saved the settings.
b)
Depends on the speaker pattern setting, some parameters or settings may not be available.
c)
xxx represent a speaker channel (FL, FR, CNT, SL, SR, SB, SBL, SBR, LH, RH, SW).
d)
You can only select this parameter if "SP PATTERN" is not set to a setting with surround back or front
high speakers (page 84).
e)
You can only select this parameter if your speaker is set to "SMALL".
f)
You can only select this parameter if you select "HD-D.C.S." as sound field.
g)
For Australia and Mexico models only.
h)
x.xxx represent a version number.
To view the information on
the display panel
The display panel provides various
information of the receiver status such as
sound field.
1
Select the input for which you want to
check the information.
2
Press AMP, then press DISPLAY
repeatedly.
Each time you press DISPLAY, the
display will change cyclically as
follows.
Index name of the input
selected t Sound field currently
2)
t Volume level t Stream
applied
3)
information
When listening to FM and AM
radio
Preset station name
Sound field currently applied
Volume level
When receiving RDS
broadcast
(Europe and Australia models
only)
Program Service name or preset station
1)
t Frequency, band and preset
name
number t Sound field currently
2)
t Volume level
applied
96
GB
1)
t Input you
1)
t Frequency t
2)
t
1)
Index name appears only when you have
assigned one to the input or preset station.
Index name does not appear when only blank
spaces have been entered or it is same as the
input name.
2)
"PURE.DIRECT" appears when Pure Direct
function is activated.
3)
Stream information may not be displayed.
Note
Character or marks may not be displayed for
some languages.