Description And Location Of Parts - Sony STR-DN840 Operating Instructions Manual

Description and location of parts

Front panel
A ?/1 (on/standby) (page 32, 48, 54)
The indicator above the button lights
up as follows:
Green: The receiver is turned on.
Amber: The receiver is in standby
mode, and
– Either "Control for HDMI"
(page 88), or "Network Standby"
(page 90) is set to "On".
– "Pass Through" (page 88) is set to
"On"* or "Auto".
Lights off when the receiver is in
standby mode and "Control for
HDMI", "Pass Through", and
"Network Standby" are set to "Off".
* For Australia and Mexico models only.
Note
If the indicator flashes slowly, the software
update is in progress (page 70). If the
indicator flashes in quick succession, the
software update has error (page 99).
B SPEAKERS (page 34)
C TUNING MODE, TUNING +/–
Press TUNING MODE to operate a
tuner (FM/AM).
Press TUNING +/– to scan a station.
D A.F.D./2CH, MOVIE, MUSIC
(page 50, 51)
E Display panel (page 10)
F SOUND OPTIMIZER (page 53)
G INPUT MODE (page 77)
H DIMMER
Adjusts the brightness of the display
panel in 3 levels.
I DISPLAY (page 96)
J Remote control sensor
Receives signals from remote control.
K PURE DIRECT (page 54)
The indicator above the button lights
up when PURE DIRECT is activated.
L MASTER VOLUME (page 41)
M INPUT SELECTOR (page 41)
N
(USB) port (page 28)
O AUTO CAL MIC jack (page 33)
P PHONES jack
Connects to headphones.
9
GB