How To Load A Printer Profile With Programming Commands; About Usb Storage Device Directories - Intermec PC23 User Manual

How to Load a Printer Profile with Programming Commands

About USB Storage Device Directories

PC23 and PC43 Desktop Printer User Manual
You can load a saved LCD printer profile to another printer by sending
programming commands directly from your PC to the printer through
a terminal program (such as HyperTerminal), a serial connection, or a
network connection. All commands are case-sensitive.
Note: To load printer profiles that modify communication settings
that require itadmin rights, you must log in as an itadmin: RUN "su -p
pass itadmin".
Programming Commands to Load a Printer Profile
Connection Programming Commands
Printer running RUN "/system/usr/bin/cfg -o xmlimportset -k
Fingerprint /home/user/profiles/myprofile"
Printer running <STX><ESC>.x,/system/usr/bin/cfg -o xmlimportset -k
IPL /home/user/profiles/myprofile<ETX>
Telnet connection /system/usr/bin/cfg -o xmlimportset -k
over Port 23 /home/user/profiles/myprofile
You can use a USB storage device to install files, such as applications
and fonts on the printer. You need to copy files to specific directories
on the USB storage device so that the printer can properly install them.
USB Storage Device File Directories
File Type
Application
Font
Form/layout
Web form
Image
Display images
Configuration profile
Configuration
Chapter 4 — Configure the Printer
Place in This Directory
/apps
/fonts
/forms
/webforms
/images
/display
/profiles
/config
95