Display And Audio Settings - Intermec PC23 User Manual

Display and Audio Settings

PC23 and PC43 Desktop Printer User Manual
Bluetooth Settings (Continued)
Setting Description
Reserve Determines if the printer is exclusively
reserved for one Bluetooth device. The
first Bluetooth device that connects
with the printer locks out any other
connection attempts.
This section describes display and audio settings for the printer. To
view these settings:
From the printer Main Menu, select Settings > System Settings >
•
Display or Audio.
• From the printer web page, click the Configure tab, System
Settings > Display or Audio.
Display and Audio Settings
Setting Description
Brightness Selects the brightness of the printer screen. Medium
Idle Information Selects the information that appears on the
printer screen when it is in Idle mode.
Time Format Selects the format used to display time on
the printer.
Date Format Selects the format used to display date on
the printer.
Menu Access Determines if the Menu button on the
printer web page is accessible.
PIN Sets the password that allows access to the
Menu button on the printer web page, if
the Menu Access parameter is set to Enable
With PIN. Range is 4 to 16 characters.
Screen Timeout Selects how long the printer screen stays on
before the screen saver starts.
Feed Key Access Determines if the Feed button on the
printer keypad is enabled or disabled.
Volume Sets the printer volume.
Appendix B — Default Settings
Default
Disable
Default
IPv4 address
24 Hour
dd/mm/yyyy
Enable
1234
Disable
Enable
Off
147