Calculate Rfid Tag Position - Intermec PC23 User Manual

Calculate RFID Tag Position

PC23 and PC43 Desktop Printer User Manual
You can perform a manual calculation to come up with an estimate of
the RFID Tag Position. Because this value is an estimate, you may need
to slightly adjust the calculated value to achieve the best results.
1 Make sure Start Adjust and Stop Adjust are set to 0.
2 Measure the yChip value, which is the distance between the RFID
chip and the media edge aligned with the tear bar.
3 Note the yAntDist value for your printer:
• PC23d: 280 dots, 35 mm, 1.378 in
• PC43d: 260 dots, 33 mm, 1.299 in
• PC43t: 256 dots, 32 mm, 1.260 in
4 Use this formula to calculate the estimated Tag Position:
TagPosition=yChip - yAntDist
Chapter 2 — Set Up the Printer
69