Instrument Functions; Indicator Lights; Combination Meter - Yamaha XV16AL Service Manual

3

INSTRUMENT FUNCTIONS

INSTRUMENT FUNCTIONS

INDICATOR LIGHTS

1 Fuel indicator light "
2 High beam indicator light "
3 Turn indicator light "
4 Neutral indicator light "
5 Engine trouble indicator light "
Neutral indicator light "
This indicator comes on when the trans-
mission is in neutral.
High beam indicator light "
This indicator comes on when the head-
light high beam is used.
Turn indicator light "
This indicator flashes when the turn
switch is moved to the left or right.
Fuel level indicator light "
When the fuel level drops below approxi-
mately 3.5 L (0.8 Imp gal, 0.9 US gal), this
light will come on. When this light comes
on, turn the fuel cock to "RES". Then, fill
the tank at the first opportunity.
Engine trouble indicator light "
This indicator light will come on or flash
if trouble occurs in a monitoring circuit.
In such a case, take the motorcycle to a
Yamaha dealer to have the self-diagnos-
tic systems checked.

COMBINATION METER

1 Combination meter
2 Clock
3 Odometer/trip meter
4 Mode button
5 Set button
This combination meter is equipped with an
odometer and a twin trip meter. Pushing
the mode button will change the display
from one to the other as follows.
"ODO" → "TRIP A" → "TRIP B" → "ODO"
When set to "ODO", it indicates the motor-
cycle's total mileage. When set to "TRIP A"
or "TRIP B", it indicates the motorcycle's
mileage since the trip meter was last reset.
Use the trip meter to estimate how far you
can ride on a tank of fuel. This information
will enable you to plan fuel stops in the
future.
3 - 61
CHK
ADJ
"
"
"
"
"
"
"
"
"
"