CARBURETOR
13.Install:
• throttle stop screw
• drain hose
INSTALLING THE CARBURETOR JOINT
1. Install:
• carburetor joint 1
2. Connect:
• vacuum hose 2
EAS00492
INSTALLING THE CARBURETOR
1. Connect:
• carburetor heater connectors 1
• charcoal canister hose (carburetor to
charcoal canister) 2
2. Install:
• starter plunger
3. Connect:
• starter cable 1
4. Install:
• throttle position sensor
NOTE:
• Align the slot a of the throttle position
sensor with the projection b of the throt-
tle lever shaft.
• For the correct installation, refer to
"CHECKING
AND
THROTTLE POSITION SENSOR".
6 - 12
CARB
12 Nm (1.2 m · kg, 8.7 ft · lb)
ADJUSTING
THE
6