Yamaha XV16AL Service Manual page 16

Tool No.
Valve guide remover (6 mm)
YM-4064-A
This tool is used to remove or install the
valve guides.
Valve guide installer
YM-4065-A
This tool is used to install the valve
guides.
Valve guide reamer
YM-4066
This tool is used to rebore the new valve
guides.
Universal clutch holder
YM-91042
This tool is used to hold the clutch boss
when removing or installing the clutch
boss nut.
Sheave holder
This tool is used to hold the generator
YS-01880
rotor when removing or installing the gen-
erator rotor bolt, generator shaft bolt or
pickup coil rotor bolt.
Piston pin puller
YU-01304
This tool is used to remove the piston
pins.
Micrometer (75 ~ 100 mm)
YU-03009
This tool is used to measure the piston
skirt diameter.
Cylinder bore gauge (50 ~ 100 mm)
YU-03017
This tool is used to measure the cylinder
bore.
Pocket tester
YU-03112
This tool is used to check the electrical
system.
Tool name/Function
1 - 10
SPECIAL TOOLS
Illustration
GEN
INFO
1