Yamaha XV16AL Service Manual page 244

ROCKER ARMS, PUSH RODS AND VALVE LIFTERS
Å
ı
5
2. Install:
• dowel pins 1
• rocker arm gasket 2
3. Install:
• rocker arm base
(with rocker arms)
• push rods
▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼
a. Put the rocker arm base on the cylinder
head.
b. Install the push rods.
NOTE:
• Be sure to correctly install the push rods
between the rocker arms and valve lifters
as shown. The illustration is viewed from
the right side of the motorcycle.
Å Rear cylinder
ı Front cylinder
1 Intake side rocker arm
2 Exhaust side rocker arm
3 Intake valve lifter
4 Exhaust valve lifter
• Lubricate the push rod end balls with
engine oil.
c. Install the rocker arm base bolts.
NOTE:
Tighten the rocker arm base bolts in stages
and in a crisscross pattern.
Rocker arm base bolt
10 Nm (1.0 m • kg, 7.2 ft • lb)
▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲
5 - 25
ENG
New