Glossary; Cash Declaration - Sam4s SPS-300 series Operator's Manual

Integrated Payment Program Requirements
See RS232 Options on page 130 and set the port options for the serial port where the DataTran is
connected. Set the BAUD to 2400 and the device field to EFT (option 10) and leave the
remaining fields at the default settings.
See System Option Programming on page 168. Press PAGE DOWN until SYSTEM OPTION pg.
21 displays.
Set EFT DRAFT to Y (DATATRAN) for a normal draft. Set EFT DRAFT to N (FINE DINING)
for a draft with a tip entry line.
Set MSR CONNECTED to 0 if the MSR is connected to the DATATRAN. SET to 1 if the MSR
is connected to the PDC; or set to 2 if the card reader is internal.
See Print Option Programming on page 179. Press PAGE DOWN until PRINT OPTION pg. 16
displays. Set the number of DataTran receipt copies you wish printed.
See CHARGE 1-8 on page 198 to set the options for integrated payment charge functions. From
the appropriate charge program screen, select Y (yes) at the CONNECT EFT field. Select
CREDIT, DEBIT, GIFT or GIFT NSF at the SELECT field. Check with your CRS representative
to verify availability of different payment methods.
Sam4s SPS-300 OP Manual v1.35 Integrated Payment Appendix • 279