Special Tools - Toro Greenmaster 1000 Service Manual

Special Tools

Order special tools from the TORO SPECIAL TOOLS
AND APPLICATIONS GUIDE (COMMERCIAL PROD-
UCTS) .
Multimeter
The meter can test electrical components and circuits
for current, resistance, or voltage.
NOTE: Toro recommends the use of a DIGITAL Volt–
Ohm–Amp multimeter when testing electrical circuits.
The high impedance (internal resistance) of a digital me-
ter in the voltage mode will make sure that excess cur-
rent is not allowed through the meter. This excess
current can cause damage to circuits not designed to
carry it.
Skin–Over Grease – TOR50547
Special non–conductive grease which forms a light pro-
tective skin which helps waterproof electrical switches
and contacts.
Spark Tester – TOR4036
For testing electronic ignitions. Saves time because you
will know if the ignition is causing the problem on a non–
starting engine. The tester determines if ignition spark
is present.
Electrical System
Some tools may also be available from a local supplier.
Page 5 – 6
Figure 1
Figure 2
Figure 3
Greensmaster 1000/1600