Toro Greenmaster 1000 Service Manual page 94

1 2
13
1. Cap screw
2. Lock washer
3. Shallow rim
4. Tire
5. Hub
Disassembly
1. Remove three cap screws (1) and lock washers (2)
from the shallow rim (3) and hub (5). Remove hub from
deep rim (10).
2. Remove four cap screws (12) and flange nuts (13)
from the deep rim (10) and shallow rim (3). Remove
shallow rim from the deep rim.
3. Remove bolt (9) from the hub (5). Remove bolt (8),
spring (7), and retaining lever (6) from the hub.
Wheels and Accessories
3 4
12
14
11
Figure 13
6. Retaining lever
7. Spring
8. Bolt
9. Bolt
10. Deep rim
Page 6 – 12
5
10
11. Inner tube
12. Cap screw
13. Flange nut
14. Wheel shaft
Reassembly
1. Reinstall retaining lever (6), spring (7), and bolt (8)
to the hub (5). Reinstall bolt (9) to the hub. Tighten both
bolts
2. Reinstall shallow rim (3) into the deep rim (10). Se-
cure shallow rim to the deep rim with the four cap screws
(12) and flange nuts (13). Tighten fasteners.
3. Reinstall hub (5) into deep rim (10). Secure hub to
deep rim with three cap screws (1) and lock washers (2).
Tighten fasteners.
6
7
8
9
Greensmaster 1000/1600