Light Control - Ducati Superbike 1199 Panigale Owner's Manual

Light control

1
Low / High beam
This function allows you to reduce current
consumption from the battery, by managing
headlight switching-on and off.
At Key-On, the high beam and low beam lights are
B
off, only the parking lights are turned on.
Once the engine is started, the low beam is turned
A
on; with engine running the standard operation of the
lights is restored: it is possible to switch on and off
the high beam using button 1 position A (fig. 126), or
5
flash using button 1 position B (fig. 126).
1
If the engine is not started after key-on, it is still
possible to turn on the low/high beam by pressing
button 1 position A (fig. 126) on the left switch; press
it once to turn on the low beam; any further time you
press it you switch between low and high beam. If
engine is not started within 60 seconds since the
button was first pressed, the low and high beam
lights are turned off.
3
If the low beam or high beam was turned on before
starting the engine (with the procedure described
above), the headlight turns off automatically when
starting the engine and will turn on again when the
engine has been completely started.
fig. 126
176