To save the new setting, hold button (4) for 3
seconds while the MEMORY item is highlighted in
orange. If new settings have been saved,
MEMORIZED will be shown in green for 1 second,
the set level or status will be refreshed (refresh is
indicated in green) and then EXIT will be highlighted
in green.
To exit the menu and go back to previous page,
select EXIT and press button (4).
Note
When you enable or disable the ABS through
this function, i.e. toggling from disabled to enabled
system or vice-versa, the procedure for activating or
deactivating the ABS is carried out: the change of
status of the ABS control unit is not instantaneous, it
takes at least 6 seconds.
114
2
ABS
MEMORY
1
ABS
MEMORIZED
1
ABS
MEMORY
OFF
1
2
3
OFF
1
2
3
OFF
1
2
3
fig. 64