To adjust the headlight beam, turn the four screws (1)
and (2) located at the front, on the right and left side
of the vehicle; in particular:
the two screws (1), located on the right and left side
of the vehicle allow you to adjust the beam vertically,
the two screws (2), located on the right and left side
of the vehicle allow you to adjust the beam
horizontally.
Warning
The headlight might fog up if the vehicle is used
under the rain or after washing.
Switch headlight on for a short time to dry up any
condensate.
230
2
1
2
1
fig. 183
2
1
fig. 184