Placing Calls To Contacts - Yealink SIP-T29G User Manual

When you place a call to the contact or receive a call from the contact, the LCD screen
will show the contact photo.
To place a call to a contact from the local directory:
1. Press the Directory soft key.
The IP phone enters the local directory directly as there is only Local Directory
enabled in the directory by default.
If Local Directory is removed from the directory, press Menu->Directory->Local
Directory to enter the local directory.
2. Select the desired contact group and then press the Enter soft key.
3. Press or to highlight the desired contact.
4. Do one of the following:
If only one number for the contact is stored in the local directory, press the Send
-
soft key to dial out the number.
If multiple numbers for the contact are stored in the local directory, press the
-
Send soft key to display a list of numbers.
Press or
Press the Send soft key to dial out the number.
to highlight the desired number.
Customizing Your Phone
47