Transfer; Hold - Yealink SIP-T29G User Manual

Dependencies:
Usage:
Press the DSS key to forward an incoming call to the number specified in the Value field.
Note
If the Value field is left blank, the DSS key performs the same as the FWD soft key when
receiving an incoming call.

Transfer

When there is an active call on the phone, you can use this key feature to handle the call
differently depending on the transfer mode assigned to the DSS key.
Dependencies:
Usage:
When the transfer mode on DSS key is Blind Transfer, press the DSS key to complete

the blind transfer to the number specified in the Value field.
When the transfer mode on DSS key is Attended Transfer, press the DSS key to dial

out the number specified in the Value field, and then perform the attended or
semi-attended transfer.
When the transfer mode on DSS key is New Call, press the DSS key to place a new

call to the number specified in the Value field.
Transfer mode via DSS key is configurable via web user interface at the path
Note
Features->Transfer->Transfer Mode Via Dsskey.
If the Value field is left blank, the DSS key performs the same as the TRAN key or the
Transfer soft key during a call. For more information, refer to

Hold

You can use this key feature to place an active call on hold or retrieve a held call.
Dependencies:
Usage:
1. Press the DSS key during an active call to place the call on hold.
Type (Key Event)
Key Type (FWD)
Label (key label displayed on the LCD screen)
Value (the number you want to forward to)
Type (Key Event)
Key Type (Transfer)
Label (key label displayed on the LCD screen)
Value (the number you want to transfer to)
Type (Key Event)
Key Type (Hold)
Label (key label displayed on the LCD screen)
Customizing Your Phone
Call Transfer on page 111.
73