Two Serial Ports - Sony PCS-XG100 System Integration Manual

PCS-XG100/XG77 System Integration Manual

1.7. Two Serial Ports

The PCS-XG unit is equipped with two serial ports on the rear panel. One is intended for
external control, the other is for maintenance.
Rear Panel (Photo: PCS-XG100S)
No Terminal name
(1) AUX CONROL
(2) MAINTENANCE
Serial Connector Pin Assignments
Use
External control
Taking a debug log/
Engineering maintenance
2 Receive Data (RxD)
3 Transmit Data (TxD)
5 Signal GND
20
(1)
Baud rate
bps: 38400
Data bit: 8
Parity: none
Stop bit: 1
bps: 115200
Data bit: 8
Parity: none
Stop bit: 1
PCS-XG100S/XG77S Side
(2)