Environment Settings Of Websam Nec Storage Manager Server - NEC S1500 Setup Manual

6.2.1

Environment Settings of WebSAM NEC Storage Manager Server

Proper environment settings are required to start the WebSAM NEC Storage Manager server.
This section describes how to set the items required to monitor the disk array unit.
For other items, refer to the "NEC Storage Manager Installation Guide".
6-2-1-1 Setting Disk Array Information
The disk array information (including the identification of the disk array unit to be
monitored by the WebSAM NEC Storage Manager server) can be set using the following
environment setting dialog boxes.
After the WebSAM NEC Storage Manager server is installed, the following dialog box
appears.
If the dialog box does not appear, select [Start]
Server 2003)
[Environment Settings] in the WebSAM NEC Storage Manager Server Menu.
When the Setting Utility dialog box shown below appears, press the [Add] button.
→
[WebSAM NEC Storage Manager Server]
Figure 6.2.1 Disk array list tab
→
[Programs] ([All Programs] for Windows
→
- -
52
[Environment Settings] or