Table of Contents
Advertisement
c. Specifying the number of logical disks and their capacity
When you specify the number of logical disks and their capacity on the [Binding
Method] dialog box and press [Next], the [Specify Number of LDs and LD Capacity]
dialog box appears.
Specify the number of logical disks and their capacity and press [Next].
Figure 6.4.26 Specifying number of logical disks and their capacity
6. Setting the detail parameters for logical disk binding
On the [Setting Detail Parameter for LD Binding] dialog box, you can confirm or change the
format, name, start number and binding time of a logical disk.
For more information on these changes, see "6.2.1 Binding Logical Disks" in the "NEC
Storage Manager Configuration Setting Tool User's Manual (GUI)".
Press [Next] when you are ready to proceed to the next screen..
Figure 6.4.27 Setting detail parameter for logical disk binding
-
-
77
Advertisement
Table of Contents
