Table of Contents
Advertisement
(6) Disk Enclosure Confirmation
If you selected [No attached Disk Enclosure] in the step (5) Disk enclosure unit configuration, this
dialog box does not appear. Go to (7) Network configuration.
If you selected [Attached Disk Enclosure Units], a specific confirmation dialog box appears depending
on the number of disk enclosures.
Check the connections of the FC and SATA disk enclosures. Confirm that the each FC and SATA disk
enclosure is connected correctly and that each ENC ID is set correctly.
IMPORTANT: Always turn off the power switches of the disk
array unit and of any FC and SATA disk enclosures before you
change ENC IDs and/or cable connections.
-
-
38
Advertisement
Table of Contents
