Table of Contents
Advertisement
1. Installation
Extend the clamp section of the AC cable clamp, fit it to the AC cord, and lock the clamp
section lightly.
Then, move the clamp section towards the unit and position the clamp at a point near the end
of the plug. Securely lock the clamp section to avoid disconnection.
NOTE: A loose clamp may cause the accidental disconnection
of a power cord. Securely lock the AC clamp at a point near the
end of power cord.
2. Removal
Push the protrusion on the AC clamp (as shown in the figure below) to release the lock.
Remove the AC clamp from the power cord.
Cable clamp
Protrusion
-
-
15
Release
Advertisement
Table of Contents
