Table of Contents
Advertisement
4. On the right side of the rack, install the other rail using the same procedure.
Figure 3.2.5 Installing Rail on the Right Side of the Rack
5. Lift the unit, put the rear section on the rails, and push it into the rack.
NOTE: The unit is very heavy. Be careful not to drop it while
you lift it.
Fasten the four set screws at the two left and two right points on the front of the unit. The
figure below only shows the right part of the unit. Fix the left part of the unit in the same way.
Figure 3.2.6 Installing the Unit in the Rack
-
Screws
-
12
Advertisement
Table of Contents
