Rewinder Module - Intermec EasyCoder PD41 Service Manual

Rewinder Module

Cover Plate
Empty Connector
Cutter Connector
Rewinder Module: Exploded view
EasyCoder PD41/PD42 Printer Service Manual
This section describes the optional internal rewinder required for peel-off
(self-strip) and batch takeup operation.
The rewinder module is an optional device for the EasyCoder PD41/PD42
printer. The printer is prepared with belt, pulley, and gear train for driving
the rewinder using the same stepper motor that also drives the platen roller
and transfer ribbon rewinder. A removable plate covers the hole in the
center section for the rewinder.
Gear
Washer
E-ring
Flange
E-ring
Rewinder Module: Driving components
The rewinder module consists of the parts depicted below. Only the liner
retention clip is available as a spare part.
Chapter 3 — Replacing Parts
Gear/Pulley
Connects to outer
Belt
pulley of stepper
motor
Linear
retention
clip
57