Intermec EasyCoder PD41 Service Manual page 47

Screws(x3)
Media Supply Post: Exploded View
EasyCoder PD41/PD42 Printer Service Manual
Tall Edge Guide (exploded)
Center Section
To remove the edge guide
1 Unhook the coil spring from the hook at the bottom of the plastic edge
guide underneath the post.
2 Remove the coil spring and the washer, then pull up the edge guide and
save it for possible later use.
Hook
Post
Guide Plate
Post
Chapter 3 — Replacing Parts
Short Edge Guide
Washer
Spring
Screws(x3)
Edge Guide
Hook
Washer
Coil Spring
33