Intermec EasyCoder PD41 Service Manual page 29

EasyCoder PD41 Printer (continued)
EasyCoder PD41/PD42 Printer Service Manual
Firmware (IPL)
Operating system
Smooth fonts
Resident scalable fonts
Character sets
Resident bar codes
Environment
Operating temperature
Storage temperature
Operating humidity
Storage humidity
Media
Media width
Media roll diameter
Internal rewinder diameter
Media roll core diameter
Media thickness
Transfer Ribbon
Material
Winding
Ribbon width
Ribbon roll diameter (outer)
Inner core diameter
Sensors
Label gap/black mark/out of
media
Printhead lifted
Label taken
Ribbon end
Controls
LED indicators
Keys
Electronics
Microprocessor
Standard memory
Chapter 2 — Models and Options
IPL v10.x.x
TrueType and TrueDoc fonts
13 (+21 simulated bitmap)
• 23 single-byte character sets standard
• UTF-8 support as standard
31
° ° °
+5 C to +40 C (+41 F to 104
° ° °
-20 C to 70 C (-4 F to 122
20 to 80% non-condensing
10 to 90% non-condensing
25 to 118 mm (1 to 4.6 in)
Max 114 mm (4.5 in) with cutter
213 mm (8.4 in) max.
190 mm (7.5 in) with internal rewinder
Max 140 mm (5.51 in)
38.1 to 76.2 mm (1.5 to 3 in)
60 μm to 250 μm (2.3 to 9.8 mils)
Wax, hybrid, or resin
Ink on either inside or outside of roll
30 to 110 mm (1.18 to 4.33 in)
76 mm (2.99 in) equivalent to 450 m (1471 ft.) of
ribbon.
25.2 to 25.6 mm (1 in)
Yes
Yes
Yes
Yes
Power, Data/Ready, Error, Ready-to-Work™
1 Print Button + 5 Soft Keys
ARM 9
4 MB flash, 8 MB SDRAM.
°
F)
°
F)
15