Inspection Procedure; Engine And Oil - MULTIQUIP MTX SERIES Service Manual

5. INSPECTION PROCEDURE

5.1 External appearance check
(1) Installation of parts (loosened screw, defective parts, etc.)
(2) Damage on machine
(3) Oil check (level and contamination)
A. Engine oil (SAE10W-30 when shipped) (See operation manual for the engine)
B. Main body oil (SAE10W-30 when shipped) (See table 1)
(4) Shock rubber for damage, crack, fatigue, hardening, etc.
5.2 Operating test
(1) Check for engine speed. (Idling and Operating speed)
Check for abnormal noise and jump during operation.
(2)

6. ENGINE AND OIL

Model
Engine type
Idling engine speed
Setting speed
Fuel tank capaity
Lubricant for Body
Capacity of Lubricant
for Body
Lubricant for Engine
Capacity of Lubricant
for Engine
Fuel
MTX-60
GX100U-KRBF
1900 - 2000
rpm
3800 - 4100
rpm
liters
2 (2.1)
(quart)
Automobile Oil SAE 10W-30; Class SE or higher
liters
0.65 (0.69)
(quart)
Automobile Oil SAE 10W-30; Class SE or higher
liters
0.28 (0.30)
(quart)
MTX-70
Honda
1900 - 2000
3800 - 4100
Unleaded Gasoline
5
MTX-80 MTX-90
Robin
EH12-2D46530
1900 - 2000 1900 - 2000
3400 - 3600 3500 - 3700
3 (3.2)
0.82 (0.87)
0.4 (0.42)
Table 1