Speeddial/Xfer - Mitel 6863i User Manual

Line Keys and Programmable Keys
3. Select Speed Dial Edit. The Press SD button prompt displays.
Note:
If you select a key that is currently set as a speed dial key, the speed dial information displays for you to edit.
4. Press an unconfigured programmable key or keypad key.
Notes:
• If a number on the keypad is set up as a speed dial key, pressing the applicable number in the speed dial editing
process also displays the speed dial edit screen. The edit screen allows you to change the Speed Dial Number
and Line setting.
• If you press a key that is NOT set up as a speed dial key, the phone displays an Invalid Key message. However, if
you press an empty keypad key or programmable key that is set to None, it initiates the Add a Speed Dial Key
process allowing you to setup a new speed dial key.
5. Enter a phone number or extension to assign to that speed dial key.
Press 4Save to save the number as a speed dial key.
6.
By default, the phone automatically assigns the speed dial key to line 1 if available. To select a different line, use the
2 and 5 navigation keys.
Notes:
• You can cancel out of the speed dial editing process at any time without saving, by pressing the
• On the 6863i, you can remove the speed dial key by erasing the speed dial number digits (leaving the speed dial
value blank) and then pressing 4Save. Use the
Press 4Save to save the speed dial key to the line specified.
7.

Speeddial/Xfer

The Speeddial key allows a number to be dialed quickly by pressing one key configured for speed dialing. The Transfer
key allows a call to be transferred to other recipients blindly or consultatively. The Speeddial/Xfer key combines the
Speed dial and Transfer key's functionality together allowing you to transfer calls or use speed dial with one key.
Note:
It is recommended that you enable the Switch UI Focus to Ringing Line parameter when using the Speeddial/Xfer fea-
ture. For more information about this parameter, see
The Speeddial/Xfer key has the following capabilities:
• Speed Dial/Xfer and Speed Dial: When the phone is in the idle state, pressing the Speeddial/Xfer key causes the
phone to go offhook and dial the predefined extension.
• Speed Dial/Xfer and Blind Transfer: When the phone is connected to a call, pressing the Speeddial/Xfer key blind
transfers the call to the predefined target.
If transferring a call fails, a message Transfer Failed displays, and you can reconnect the call (get the call back) by press-
32
Speeddial
Enter Number>
333_
Cancel Save
Line:1
Change
Cancel Save
3
key to delete the digits.
"Switch UI Focus to Ringing Line"
key.
on page 41.
6863i User Guide for Clearspan – 2895-001 – October 2014