Speeddial/Xfer - Mitel 6865i User Manual

Line Keys and Programmable Keys

Speeddial/Xfer

The Speeddial key allows a number to be dialed quickly by pressing one key configured for speed dialing. The Transfer
key allows a call to be transferred to other recipients blindly or consultatively. The Speeddial/Xfer key combines the
Speed dial and Transfer key's functionality together allowing the user to transfer calls or use speed dial with one key.
Note:
It is recommended that you enable the Switch UI Focus to Ringing Line parameter when using the Speeddial/Xfer fea-
ture. For more information about this parameter, see
Speeddial/Xfer Key Requirements and Functionality
The Speed Dial/Xfer key has the following capabilities:
• Speed Dial/Xfer and Speed Dial: When the phone is in the idle state, pressing the Speed Dial/Xfer key causes the
phone to go offhook and dial the predefined extension.
• Speed Dial/Xfer and Blind Transfer: When the phone is connected to a call, pressing the Speed Dial/Xfer key blind
transfers the call to the predefined target.
If transferring a call fails, a message Transfer Failed displays, and you can reconnect the call (get the call back) by
pressing the line key again.
• Speed Dial/Xfer and Call Forward: When the phone is in the ringing state, pressing the Speed Dial/Xfer key forwards
the call to the predefined extension.
76
"Switch UI Focus to Ringing Line" on page 145.
41-001566-00 REV00 – 10.2014