Call Forward; Preferences - Mitel 6863i User Manual

Options Menu
Accessing the IP Phone Options
1. Press the key on the phone to enter the Options list.
Press the 5 and 2 keys to view the different options.
2.
key, the 4 Enter key, or press the number of the corresponding option to select an option.
3. Press the
4. Change the selected option if required.
key or the 4Set, or 4Done key to save the change.
5. Press the
key, the 3 navigation key, or the
6. Press the

Call Forward

You can use the Options menu to set your phone to automatically forward incoming calls when you are already in a call,
when you don't answer, or always. You can access Call Forward settings from the Options menu or from a configured Call
Forward softkey. For more information, refer to

Preferences

Ring Tones and Tone Sets
You can configure ring tones and ring tone sets on the IP phone. There are several distinct ring tones you can select from
to set on the IP phones. You can enable/disable these ring tones on a global or per-line basis.
The following table identifies the valid settings and default values for each type of configuration method:
Configuration Method
IP Phone UI
Lines 1 to 2
14
key at any time to exit without saving changes.
"Call Forward Key" on
Valid Values
Global
Tone 1
Tone 2
Tone 3
Tone 4
Tone 5
Silent
Per-Line Setting:
Global
Tone 1
Tone 2
Tone 3
Tone 4
Tone 5
Silent
page 23.
Default Value
Global Setting:
Tone 1
Per-Line Setting:
Global
6863i User Guide for Clearspan – 2895-001 – October 2014