Table of Contents
Advertisement
LEDs
100M
COLLISION
FULL DUPLEX
LINK/ACTIVITY
POWER
More details are provided in Chapter 2.
MDI Button
The following ports associated with MDI buttons:
Port A on the AT-RS710TX and the AT-RS718TX
Port 8 on the AT-FS708
Specific ports associated with MDI buttons are described in Table 4. The
buttons give you the flexibility of using a straight-through cable to connect to a
hub or another switch, or to any DTE such as an end station or a server.
AT-RS710TX, AT-RS718TX, and AT-FS708 Switches Installation Guide
Table 3: LED Status
Color
Off means the bandwidth is 10 Mbps.
Green
On means the bandwidth is 100 Mbps.
Applies to Ports A and B on the AT-RS710TX and the
AT-RS718TX and to all ports on the AT-FS708.
Blinking indicates the port is detecting a collision.
Amber
Applies to half duplex transmission only. Intermittent
collisions are normal.
On indicates full duplex transmission.
Green
On indicates a valid physical link on the port.
Green
Blinking indicates data is being transmitted.
LINK and ACTIVITY are two separate LEDs on the
AT-FS708.
Off means there is no power to the switch.
Green
On means there is power to the switch.
Description
7
Advertisement
Table of Contents
