System Memory - Intermec PENKEY 6100 Programmer's Reference Manual

SECTION 1
Power Management
"
"
"
"
Batteries
B CAUTION:
This terminal has ONE primary power source, the MAIN Battery. The only function of
the Backup Battery is to maintain power to RAM while changing Main Batteries. At all
times during operation and while being stored (overnight, long periods of time, and
even while in suspend), the unit must have its Main Battery installed.
" NOTE:
A discharged Backup Battery takes 14 hours to recharge. A discharged Main Battery takes 2
hours to recharge.

System Memory

"
"
"
" NOTE:
If you upgrade a system that had a flash version prior to 1.11, you will also need to upgrade
the flash. Refer to the Reprogramming Flash Memory instructions on page 1-7.
"
"
"
"
PEN*KEY
R
6100 Computer Programmer's Reference Guide
Getting Started
1-3