Intermec PENKEY 6100 Programmer's Reference Manual page 245

" " " " "
Introduction
" NOTE:
Because this is an open system, your system configuration could differ somewhat from that
shown in the following tables; for instance, you may have a custom installation. If you want
to determine your exact configuration, refer to the .INI files in flash memory or in the 6100
Tool Kit. The IRQ and COM port mapping, for example, is defined in CARDID.INI. To verify
this information, enter "CARDINFO /v" from the DOS screen, comparing that with the defini-
tions in the CARDID.INI file.
Reference, System Information
" " " " " " " " " "
R
Topic Summary
List of Tables
R
PEN*KEY 6100 Computer Programmer's Reference Guide
Section 7
" " " " "
Page
Page
7-1