Intermec PENKEY 6100 Programmer's Reference Manual page 30

Getting Started
"
"
"
"
"
Windows Configurations
should
"
"
"
"
"
"
Prerequisites for IFL Card Creation
"
"
"
"
"
Creating a Master Mode Boot (IFL) Card
PROG 61FL1000.BIN d:
" NOTE:
Do not use the DOS COPY or XCOPY command to create the IFL card. Master mode boot-
ing requires certain files at specific locations on the SRAM card. DD.EXE (which is part of
the PROG.BAT process) is designed to place every byte in a specific location on the media;
these DOS commands are not.
" NOTE:
The PROG.BAT file performs a write operation followed by a verify operation. It is possible
for the write operation to succeed and the verify to fail. This is particularly true when using a
DataBook TMD–500–03. If you are using such a card drive, this problem can be corrected
by downloading updated drivers from the DataBook BBS.
R
1-8 PEN*KEY 6100 Computer Programmer's Reference Guide
SECTION 1