Default Value - Intermec PENKEY 6100 Programmer's Reference Manual

SECTION 5 Communications and Device Support
<DDOSFIL00001X027>F\DATA\DATAFILE.DAT S102000
<DDOSFIL00001X027>F\DATA\DATA0001.DAT S102000
<DDOSFIL00001X031>F\HH000001\DATAFILE.DAT S102000
Usage
PSROM0C.EXE ctl–file
ctl-file
Communications Log File
COM=
(Example: COM=4)

Default value:

CONFIG=
(Example: CONFIG=ATE0V0Q0X4&C1&D2&M0&RS0=0)
DATABITS=
(Example: DATABITS=7)
Valid values:
IPCLIENT=
Supported in PSROM0C V3.xx only.
IPHOST=
R
PEN*KEY 6100 Computer Programmer's Reference Guide 5-7