Intermec PENKEY 6100 Programmer's Reference Manual page 272

Sample Configuration Files
;– COM3 is where the PCMCIA modem installs, if using one.
COM3Irq=10
COM3Base=03E8
;– The following fonts are required for Non-Windows application support.
; Optional.
;woafont=dosapp.fon
;EGA80WOA.FON=EGA80WOA.FON
;EGA40WOA.FON=EGA40WOA.FON
;CGA80WOA.FON=CGA80WOA.FON
;CGA40WOA.FON=CGA40WOA.FON
;– The following is required for Non-Windows application support
;[NonWindowsApp]
;CommandEnvSize=128
Example WIN.INI File
EXAMPLE:
The following is an example of a WIN.INI file, for use with Windows 3.1:
;–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
; Norand 6300 Windows 3.1 WIN.INI
;–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
[windows]
NorShellRun=winfile.exe
spooler=
load=
run=
Beep=yes
NullPort=None
BorderWidth=5
CursorBlinkRate=530
DoubleClickSpeed=595
Programs=com exe bat pif
Documents=
DeviceNotSelectedTimeout=15
TransmissionRetryTimeout=45
KeyboardDelay=2
KeyboardSpeed=31
ScreenSaveActive=0
ScreenSaveTimeOut=120
DoubleClickWidth=96
DoubleClickHeight=96
CoolSwitch=1
DosPrint=no
; Uncomment this line to make the 48xx NPCP printer be the default.
;device=NORAND 4800,NOR4800,LPT1.DOS
; Uncomment this line to make the 6805 IrDA printer be the default.
device=NORAND 6805,NOR6805,LPT2.DOS
[Desktop]
Wallpaper=WINTITLE.RLE
TileWallPaper=0
Pattern=(None)
GridGranularity=0
IconSpacing=50
[Sounds]
; These sounds are played when Windows starts and quits.
SystemStart=tada.wav, Windows Start
SystemExit=chimes.wav, Windows Exit
; These sounds are played when A/C is connected and disconnected.
ApmAcOn=tada.wav, A/C Online
ApmAcOff=chimes.wav, A/C Offline
; To reduce system overhead, do not enable any of these sounds.
; sound entry blank causes a simple beep to be played in its place.
R
A-10 PEN*KEY 6100 Computer Programmer's Reference Guide
APPENDIX A
Leaving a