Configuring General Settings Using Centreware Internet Services; Viewing Printer Information; Configuring Printer Defaults - Xerox Phaser 6020 User Manual

Installation and Setup
Configuring General Settings Using CentreWare
Internet Services
This section includes:
•

Viewing Printer Information ........................................................................................................................................... 40

•

Configuring Printer Defaults ........................................................................................................................................... 40

• Resetting the Printer ........................................................................................................................................................... 41
You can configure general printer settings from your computer using your Web browser and CentreWare
Internet Services.
Note: A USB connection does not provide access to CentreWare Internet Services.
Viewing Printer Information
1. At your computer, open a Web browser, in the address field, type the IP address of the printer, then
press Enter or Return.
2. In CentreWare Internet Services, click Properties.
3. To expand the menu, in the Properties pane, for the General folder, click the plus symbol (+).
4. Under Version Information, find the printer model number, serial number, and the firmware version
number for the operating systems.
5. Under Page Description Language, find the version numbers for each of the page description
languages installed on the printer.
Configuring Printer Defaults
The Printer Defaults page displays the printer model information and product code or serial number. It
also provides a place to enter the name and location of the printer and the name and email address of
the contact.
1. At your computer, open a Web browser, in the address field, type the IP address of the printer, then
press Enter or Return.
In CentreWare Internet Services, click Properties.
2.
3. To expand the menu, in the Properties pane, for the General folder, click the plus symbol (+).
Click Printer Defaults.
4.
5. In the fields, type descriptive information as needed.
6. Click Save Changes.
® ®
40 Xerox Phaser 6020 Printer
User Guide