Connecting to a Wireless Network
A wireless local area network (WLAN) provides the means to connect two or more devices in a LAN
without a physical connection. The printer can connect to a wireless LAN that includes a wireless router
or wireless access point. Before connecting the printer to a wireless network, the wireless router must be
configured with a service set identifier (SSID), a passphrase, and security protocols.
Notes:
•
Wireless networking is available only on printers with the optional Wireless Network Adapter
installed.
•
Some features are available only if you install the optional Data Memory Drive.
Resetting Wireless Settings
If the printer was previously installed in a wireless network environment, it could retain setup and
configuration information.
To prevent the printer from trying to connect to the previous network, perform the following steps:
At the printer control panel, press the Machine Status button.
1.
2.
Touch the Tools tab.
Touch Admin Setting > Network > Wi-Fi.
3.
4.
Touch the Down arrow to navigate to the next screen.
5.
Touch Reset Wi-Fi > Reset > Yes, Reset.
Connecting to a Wireless Network Using the Control Panel Wi-Fi Setup
Wizard
Before you begin, ensure that you have the wireless network Service Set Identifier (SSID), encryption
type, and passphrase. For details, see
Wireless Network Manually
To connect to a wireless network using the Wi-Fi Setup Wizard:
At the printer control panel, press the Machine Status button.
1.
2.
Touch the Tools tab.
Touch Admin Setting > Network > Wi-Fi.
3.
4.
Touch Wi-Fi Setup Wizard.
5.
Select the desired network.
Note:
If the wireless network does not appear in the list, see
Manually
on page 37.
6.
Touch Next.
Collecting Wireless Network Information for Connecting to a
on page 36.
®
Xerox
WorkCentre
Connecting to a Wireless Network
®
3615 Black and White Multifunction Printer
System Administrator Guide
Network Connectivity
35