Accessing The Printer; Logging In - Xerox WorkCentre 3615 System Administrator Manual

Accessing the Printer

The system administrator can set access rights on the printer to ensure that unauthorized users cannot
access the printer. If the system administrator configures authentication and authorization, users require
a login and password to access some or all of the features of the printer. The administrator can also
configure accounting to require an accounting code to access tracked features.

Logging In

Logging in is the process by which you identify yourself to the printer for authentication. If
authentication is set, to access printer features, you log in with your user credentials. The system
administrator user name is admin and the default password is 1111.
Logging In at the Control Panel
1. At the printer control panel, press the Machine Status button.
2. Touch Tools > Admin Settings.
3. Type the passcode using the keypad.
4. Touch OK.
Note: Repeat steps 3 and 4 of the procedure to access each service that is password protected.
Logging In to CentreWare Internet Services
When Administrator Mode is enabled, the Jobs, Address Book, Properties, and Support tabs are locked
until you enter the administrator user name and password.
To log in to CentreWare Internet Services as the administrator:
1. At your computer, open a Web browser, in the address field, type the IP address of the printer, then
press Enter or Return.
Note: If you do not know the IP address of your printer, see
page 12.
Click the Jobs, Address Book, Properties, or Support tab.
2.
3. Type the administrator user name.
4. Type the password, then type the password again to verify.
® ®
Xerox WorkCentre 3615 Black and White Multifunction Printer
Finding the IP Address of Your Printer
System Administrator Guide
Initial Setup
on
13