Managing Certificates; Before You Begin; Preparing To Manage Certificates - Xerox WorkCentre 3615 System Administrator Manual

Security

Managing Certificates

This section includes:
•

Before You Begin .............................................................................................................................................................. 74

•

Preparing to Manage Certificates ............................................................................................................................. 74

Before You Begin
Before you can manage certificates, do the following:
• Ensure that the optional Data Memory Device is installed.
• Ensure that Data Memory Device Encryption is enabled. For details, see
Encryption Settings
• Ensure that SSL is configured. For details, see
Preparing to Manage Certificates
Some settings are available only when the encryption setting on the optional Data Memory Drive is
enabled. To use these settings, enable data encryption and set up an encryption key.
Note: All stored data is deleted after you change the Data Encryption Settings.
To configure the Data Encryption Settings:
1. At the printer control panel, press the Machine Status button.
2. Touch Tools > Admin Settings.
Use the Up or Down arrows to navigate, then touch Secure Settings.
3.
4. Touch Device Memory Data Encryption > Encryption > On.
At the prompt, enter a passphrase, then touch OK.
5.
To delete stored documents on the drive and restart the printer, at the prompt, touch Yes, Delete.
6.
7. To change the encryption key for Device Memory Data encryption, touch Encryption Key, then
enter the passphrase. At the prompt, touch Yes, Delete.
8. Touch the Back arrow to return to the previous menu, or press the Services Home button to return
to Service Home.
To enable HTTPS communication, create a certificate, and enable SSL:
1. At your computer, open a Web browser, in the address field, type the IP address of the printer, then
press Enter or Return.
Click Properties.
2.
3. In the left navigation panel, scroll to Security, then select SSL.
4. To configure the printer to create a digitally signed certificate, click Create New Certificate.
To select the DKIM signature type, for Public Key Method, select RSA/SHA-256 or RSA/SHA-1.
5.
®
74 Xerox WorkCentre
System Administrator Guide
on page 73.
®
3615 Black and White Multifunction Printer
Preparing to Manage Certificates
Configuring the Data
on page 74.